1.2. Algebraic geometry
This section lists the LMFDB definitions in the category ag. Each definition links back to its LMFDB knowl.
Abelian surface. (LMFDB)
An abelian surface is an abelian variety of dimension 2.
Examples are given by the product of two elliptic curves, or the Jacobian of a curve of genus 2.
Depends on: Definition 1.2.2 Definition 1.2.17 Definition 1.2.20 Definition 1.2.35 Definition 4.1.4
Abelian variety. (LMFDB)
An abelian variety defined over the field K is a smooth connected projective variety equipped with the structure of an algebraic group. The group law is automatically commutative.
An abelian variety of dimension 1 is the same as an elliptic curve.
Depends on: Definition 1.2.60 Definition 4.1.4
-
AlgebraicGeometry.AffineSpace[complete] -
AlgebraicGeometry.AffineSpace.homOverEquiv[complete] -
AlgebraicGeometry.AffineSpace.coord[complete]
Affine space. (LMFDB)
Affine space \mathbb{A}^n(K) of dimension n over a field K is the set K^n.
If P=(x_1,\dots,x_n) is a point in \mathbb{A}^n(K), the x_i are called the *affine coordinates* of P. Thus
\mathbb{A}^n(K) = \{(x_1,\dots,x_n)\mid x_1,\dots,x_n\in K\}.
Tau Ceti Review: AlgebraicGeometry.AffineSpace, AlgebraicGeometry.AffineSpace.homOverEquiv, AlgebraicGeometry.AffineSpace.coord.
Depends on: Definition 1.1.30
Lean code for Definition1.2.3●3 definitions
Associated Lean declarations
-
AlgebraicGeometry.AffineSpace[complete]
-
AlgebraicGeometry.AffineSpace.homOverEquiv[complete]
-
AlgebraicGeometry.AffineSpace.coord[complete]
-
AlgebraicGeometry.AffineSpace[complete] -
AlgebraicGeometry.AffineSpace.homOverEquiv[complete] -
AlgebraicGeometry.AffineSpace.coord[complete]
-
defdefined in Mathlib/AlgebraicGeometry/AffineSpace.leancomplete
def AlgebraicGeometry.AffineSpace.{u} (n : Type u) (S : AlgebraicGeometry.Scheme) : AlgebraicGeometry.Scheme
def AlgebraicGeometry.AffineSpace.{u} (n : Type u) (S : AlgebraicGeometry.Scheme) : AlgebraicGeometry.Scheme
`𝔸(n; S)` is the affine `n`-space over `S`. Note that `n : Type u` is an arbitrary index type (e.g. `ULift.{u} (Fin m)`). -
defdefined in Mathlib/AlgebraicGeometry/AffineSpace.leancomplete
def AlgebraicGeometry.AffineSpace.homOverEquiv.{u} {n : Type u} (S : AlgebraicGeometry.Scheme) {X : AlgebraicGeometry.Scheme} [X.Over S] : { f // AlgebraicGeometry.Scheme.Hom.IsOver f S } ≃ (n → ↑(X.presheaf.obj (Opposite.op ⊤)))
def AlgebraicGeometry.AffineSpace.homOverEquiv.{u} {n : Type u} (S : AlgebraicGeometry.Scheme) {X : AlgebraicGeometry.Scheme} [X.Over S] : { f // AlgebraicGeometry.Scheme.Hom.IsOver f S } ≃ (n → ↑(X.presheaf.obj (Opposite.op ⊤)))
`S`-morphisms into `Spec 𝔸(n; S)` are equivalent to the choice of `n` global sections.
-
defdefined in Mathlib/AlgebraicGeometry/AffineSpace.leancomplete
def AlgebraicGeometry.AffineSpace.coord.{u} {n : Type u} (S : AlgebraicGeometry.Scheme) (i : n) : ↑((AlgebraicGeometry.AffineSpace n S).presheaf.obj (Opposite.op ⊤))
def AlgebraicGeometry.AffineSpace.coord.{u} {n : Type u} (S : AlgebraicGeometry.Scheme) (i : n) : ↑((AlgebraicGeometry.AffineSpace n S).presheaf.obj (Opposite.op ⊤))
The standard coordinates of `𝔸(n; S)`.
-
AlgebraicGeometry.Scheme.Modules.eulerCharBelow[complete] -
AlgebraicGeometry.Scheme.genus[complete]
Arithmetic genus. (LMFDB)
The arithmetic genus of a projective scheme X is p_a(X) = (-1)^{\dim X}(\chi(X)-1) where \chi(X) is the
holomorphic Euler characteristic.
Tau Ceti Review: AlgebraicGeometry.Scheme.Modules.eulerCharBelow, AlgebraicGeometry.Scheme.genus.
Depends on: Definition 1.2.31
Lean code for Definition1.2.4●2 definitions
Associated Lean declarations
-
AlgebraicGeometry.Scheme.Modules.eulerCharBelow[complete]
-
AlgebraicGeometry.Scheme.genus[complete]
-
AlgebraicGeometry.Scheme.Modules.eulerCharBelow[complete] -
AlgebraicGeometry.Scheme.genus[complete]
-
defdefined in TauCeti/AlgebraicGeometry/Cohomology/EulerCharacteristic.leancomplete
def AlgebraicGeometry.Scheme.Modules.eulerCharBelow.{u} (k : Type u) [Field k] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧k)] (M : X.Modules) (n : ℕ) : ℤ
def AlgebraicGeometry.Scheme.Modules.eulerCharBelow.{u} (k : Type u) [Field k] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧k)] (M : X.Modules) (n : ℕ) : ℤ
The alternating sum `∑_{i < n} (-1)ⁱ dim_k Hⁱ(X, M)` of the dimensions of the cohomology of a sheaf of modules on a scheme over a field, truncated at degree `n`. No finiteness assumption is imposed, just as none is imposed on Mathlib's `HomologicalComplex.eulerChar`: a degree `i < n` in which `Hⁱ(X, M)` is infinite-dimensional contributes the junk value `finrank k Hⁱ(X, M) = 0`. For this sum to be the Euler characteristic `χ(X, M)` it is enough that the cohomology be finite-dimensional in degrees `< n` and vanish in degrees `≥ n`; that is a sufficient condition and not a necessary one, since a truncation that cuts off finite-dimensional cohomology whose own alternating sum vanishes computes `χ(X, M)` just as well. On a curve, the relevant truncation is `n = 2`. -
defdefined in TauCeti/AlgebraicGeometry/Cohomology/Genus.leancomplete
def AlgebraicGeometry.Scheme.genus.{u} (k : Type u) [Field k] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧k)] [_fd : FiniteDimensional k (TauCeti.AlgebraicGeometry.Scheme.Modules.Cohomology (TauCeti.AlgebraicGeometry.InvertibleSheaf.trivial X).obj 1)] : ℕ
def AlgebraicGeometry.Scheme.genus.{u} (k : Type u) [Field k] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧k)] [_fd : FiniteDimensional k (TauCeti.AlgebraicGeometry.Scheme.Modules.Cohomology (TauCeti.AlgebraicGeometry.InvertibleSheaf.trivial X).obj 1)] : ℕ
The genus `dim_k H¹(X, 𝒪_X)` of a scheme `X` over a field `k`, assuming this cohomology group is finite-dimensional. The finite-dimensionality instance `_fd` does not occur in the value — it guards the definition, so that `finrank` is never read as a genus `0` coming from its junk value on an infinite-dimensional space.
-
CategoryTheory.Aut[complete] -
CategoryTheory.Over[complete] -
AlgebraicGeometry.Scheme.IsVarietyOver[complete]
Automorphism group. (LMFDB)
An automorphism of an algebraic variety is an isomorphism from the variety to itself.
The set of automorphisms of an algebraic variety X form a group \mathrm{Aut}(X) under composition; this is the automorphism group of the algebraic variety.
Tau Ceti Review: CategoryTheory.Aut, CategoryTheory.Over.
Depends on: Definition 1.2.60
Lean code for Definition1.2.5●3 definitions
Associated Lean declarations
-
CategoryTheory.Aut[complete]
-
CategoryTheory.Over[complete]
-
AlgebraicGeometry.Scheme.IsVarietyOver[complete]
-
CategoryTheory.Aut[complete] -
CategoryTheory.Over[complete] -
AlgebraicGeometry.Scheme.IsVarietyOver[complete]
-
structuredefined in Mathlib/CategoryTheory/Endomorphism.leancomplete
structure CategoryTheory.Aut.{v, u} {C : Type u} [CategoryTheory.Category.{v, u} C] (X : C) : Type v
structure CategoryTheory.Aut.{v, u} {C : Type u} [CategoryTheory.Category.{v, u} C] (X : C) : Type v
Automorphisms of an object in a category. The order of arguments in multiplication agrees with `Function.comp`, not with `CategoryTheory.CategoryStruct.comp`.
Fields
asIso : X ≅ X
the underlying isomorphism of an automorphism
-
defdefined in Mathlib/CategoryTheory/Comma/Over/Basic.leancomplete
def CategoryTheory.Over.{v₁, u₁} {T : Type u₁} [CategoryTheory.Category.{v₁, u₁} T] (X : T) : Type (max u₁ v₁)
def CategoryTheory.Over.{v₁, u₁} {T : Type u₁} [CategoryTheory.Category.{v₁, u₁} T] (X : T) : Type (max u₁ v₁)
The over category has as objects arrows in `T` with codomain `X` and as morphisms commutative triangles.
-
classdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Basic.leancomplete
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
An **algebraic variety** over a field `K` (LMFDB `ag.variety`), as a scheme: a scheme over `K` that is geometrically integral, separated and of finite type (quasi-compact and locally of finite type) over `K`.
Extends
-
AlgebraicGeometry.GeometricallyIntegral (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.IsSeparated (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)
Methods
geometrically_isIntegral : AlgebraicGeometry.geometrically AlgebraicGeometry.IsIntegral (X ↘ AlgebraicGeometry.Spec ↧K)
Inherited from-
AlgebraicGeometry.GeometricallyIntegral
isClosedImmersion_diagonal : AlgebraicGeometry.IsClosedImmersion (CategoryTheory.Limits.pullback.diagonal (X ↘ AlgebraicGeometry.Spec ↧K))
Inherited from-
AlgebraicGeometry.IsSeparated
finiteType_appLE : ∀ {U : (AlgebraicGeometry.Spec ↧K).Opens}, AlgebraicGeometry.IsAffineOpen U → ∀ {V : X.Opens}, AlgebraicGeometry.IsAffineOpen V → ∀ (e : V ≤ (TopologicalSpace.Opens.map (X ↘ AlgebraicGeometry.Spec ↧K).base).obj U), (CommRingCat.Hom.hom (AlgebraicGeometry.Scheme.Hom.appLE (X ↘ AlgebraicGeometry.Spec ↧K) U V e)).FiniteType
Inherited from-
AlgebraicGeometry.LocallyOfFiniteType
isCompact_preimage : ∀ (U : Set ↥(AlgebraicGeometry.Spec ↧K)), IsOpen U → IsCompact U → IsCompact (⇑(X ↘ AlgebraicGeometry.Spec ↧K) ⁻¹' U)
Inherited from-
AlgebraicGeometry.QuasiCompact
-
Prime of bad reduction. (LMFDB)
For an abelian variety A of dimension g over a number field K, a prime of bad reduction (for A) is a prime \mathfrak{p} of K for which the reduction of A modulo \mathfrak{p} is not an abelian variety of dimension g over the residue field at \mathfrak{p}. The number of primes of bad reduction is always finite; these are precisely the primes that divide the conductor of A.
Depends on: Definition 1.2.15
Base change. (LMFDB)
Let V be an algebraic variety defined over a field K. If L/K is a field extension, then any set of equations that define V over K can be used to define an algebraic variety over L, the base change of V from K to L (typically denoted V_L).
An algebraic variety over a field L is said to be a base change if it is the base change of an algebraic variety defined over a proper subfield of L, equivalently, if its base field is not a minimal field of definition.
Tau Ceti Review: CategoryTheory.Over.pullback.
Depends on: Definition 1.2.60 Definition 1.1.30
Lean code for Definition1.2.7●5 declarations
Associated Lean declarations
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/FieldOfDefinition.leancomplete
def AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield.{u} (L : Type u) [Field L] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧L)] : Prop
def AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield.{u} (L : Type u) [Field L] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧L)] : Prop
A variety `X` over a field `L` **is a base change** (LMFDB `ag.base_change`) if it is isomorphic over `L` to the base change of a variety defined over a proper subfield of `L`.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/FieldOfDefinition.leancomplete
theorem AlgebraicGeometry.Scheme.isBaseChangeFromSubfield_iff.{u} {L : Type u} [Field L] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧L)] [AlgebraicGeometry.Scheme.IsVarietyOver L] : AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield L X ↔ ¬AlgebraicGeometry.Scheme.IsMinimalFieldOfDefinition L X ⊤
theorem AlgebraicGeometry.Scheme.isBaseChangeFromSubfield_iff.{u} {L : Type u} [Field L] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧L)] [AlgebraicGeometry.Scheme.IsVarietyOver L] : AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield L X ↔ ¬AlgebraicGeometry.Scheme.IsMinimalFieldOfDefinition L X ⊤
A variety over `L` is a base change if and only if `L` is not a minimal field of definition of it.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/FieldOfDefinition.leancomplete
theorem AlgebraicGeometry.Scheme.isBaseChangeFromSubfield_pullback.{u} {L : Type u} [Field L] {k₀ : Subfield L} (X₀ : CategoryTheory.Over (AlgebraicGeometry.Spec ↧↥k₀)) [AlgebraicGeometry.Scheme.IsVarietyOver ↥k₀] (hk₀ : k₀ ≠ ⊤) : AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield L ((CategoryTheory.Over.pullback (AlgebraicGeometry.Spec.map (CommRingCat.ofHom (algebraMap (↥k₀) L)))).obj X₀).left
theorem AlgebraicGeometry.Scheme.isBaseChangeFromSubfield_pullback.{u} {L : Type u} [Field L] {k₀ : Subfield L} (X₀ : CategoryTheory.Over (AlgebraicGeometry.Spec ↧↥k₀)) [AlgebraicGeometry.Scheme.IsVarietyOver ↥k₀] (hk₀ : k₀ ≠ ⊤) : AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield L ((CategoryTheory.Over.pullback (AlgebraicGeometry.Spec.map (CommRingCat.ofHom (algebraMap (↥k₀) L)))).obj X₀).left
The base change to `L` of a variety over a proper subfield of `L` is a base change.
-
defdefined in Mathlib/CategoryTheory/Comma/Over/Pullback.leancomplete
def CategoryTheory.Over.pullback.{v, u} {C : Type u} [CategoryTheory.Category.{v, u} C] {X Y : C} (f : X ⟶ Y) [CategoryTheory.Limits.HasPullbacksAlong f] : CategoryTheory.Functor (CategoryTheory.Over Y) (CategoryTheory.Over X)
def CategoryTheory.Over.pullback.{v, u} {C : Type u} [CategoryTheory.Category.{v, u} C] {X Y : C} (f : X ⟶ Y) [CategoryTheory.Limits.HasPullbacksAlong f] : CategoryTheory.Functor (CategoryTheory.Over Y) (CategoryTheory.Over X)
In a category with pullbacks, a morphism `f : X ⟶ Y` induces a functor `Over Y ⥤ Over X`, by pulling back a morphism along `f`.
-
classdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Basic.leancomplete
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
An **algebraic variety** over a field `K` (LMFDB `ag.variety`), as a scheme: a scheme over `K` that is geometrically integral, separated and of finite type (quasi-compact and locally of finite type) over `K`.
Extends
-
AlgebraicGeometry.GeometricallyIntegral (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.IsSeparated (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)
Methods
geometrically_isIntegral : AlgebraicGeometry.geometrically AlgebraicGeometry.IsIntegral (X ↘ AlgebraicGeometry.Spec ↧K)
Inherited from-
AlgebraicGeometry.GeometricallyIntegral
isClosedImmersion_diagonal : AlgebraicGeometry.IsClosedImmersion (CategoryTheory.Limits.pullback.diagonal (X ↘ AlgebraicGeometry.Spec ↧K))
Inherited from-
AlgebraicGeometry.IsSeparated
finiteType_appLE : ∀ {U : (AlgebraicGeometry.Spec ↧K).Opens}, AlgebraicGeometry.IsAffineOpen U → ∀ {V : X.Opens}, AlgebraicGeometry.IsAffineOpen V → ∀ (e : V ≤ (TopologicalSpace.Opens.map (X ↘ AlgebraicGeometry.Spec ↧K).base).obj U), (CommRingCat.Hom.hom (AlgebraicGeometry.Scheme.Hom.appLE (X ↘ AlgebraicGeometry.Spec ↧K) U V e)).FiniteType
Inherited from-
AlgebraicGeometry.LocallyOfFiniteType
isCompact_preimage : ∀ (U : Set ↥(AlgebraicGeometry.Spec ↧K)), IsOpen U → IsCompact U → IsCompact (⇑(X ↘ AlgebraicGeometry.Spec ↧K) ⁻¹' U)
Inherited from-
AlgebraicGeometry.QuasiCompact
-
Base field. (LMFDB)
The base field, of an algebraic variety is the field over which it is defined; it necessarily contains the coefficients of a set of defining equations for the variety, but it is not necessarily a minimal field of definition.
Tau Ceti Review: AlgebraicGeometry.Scheme.Over.
Depends on: Definition 1.2.2 Definition 1.2.37
Lean code for Definition1.2.8●1 definition
Associated Lean declarations
-
AlgebraicGeometry.Scheme.Over[complete]
-
AlgebraicGeometry.Scheme.Over[complete]
-
abbrevdefined in Mathlib/AlgebraicGeometry/Over.leancomplete
abbrev AlgebraicGeometry.Scheme.Over.{u} (X S : AlgebraicGeometry.Scheme) : Type u
abbrev AlgebraicGeometry.Scheme.Over.{u} (X S : AlgebraicGeometry.Scheme) : Type u
`X.Over S` is the typeclass containing the data of a structure morphism `X ↘ S : X ⟶ S`.
Bielliptic curve. (LMFDB)
A smooth projective algebraic curve X defined over a field k of genus g\ge 2 is a bielliptic curve if and only if it satisfies one of the following conditions:
-
Xadmits a 2-to-1 mapX\to Edefined over the algebraic closure\bar konto an elliptic curveE. -
There exists an involution
w \in \Aut(X)defined overksuch thatX/\langle w \ranglehas genus1andX/\langle w \rangle (k) \ne \empty. -
There exists an involution
w \in \Aut(X)defined overkhaving exactly2g -2fixed points.
The involution above is called the bielliptic involution.
Depends on: Definition 1.2.16 Definition 1.2.17
Canonical height of an abelian variety. (LMFDB)
Let A be a principally polarised abelian variety defined over a number field L. The canonical height on A is a function
\hat{h}: A(L) \to \R_{ {}\ge0}
defined on the Mordell-Weil group A(L)
which induces a positive definite quadratic form on A(L)\otimes\R.
One definition of \hat{h}(P) is \hat{h}(P)= h_{\mathrm{Kum}}(\sigma(P)), where \sigma \colon A \to K is the natural map from A to its Kummer surface K : = A/\{\pm 1\}, and h_{\mathrm{kum}} \colon K(L) \to \R the canonical height pairing associated to a theta divisor \Theta on K, which can be defined by
h_{\mathrm{Kum}}(Q)=\lim_{n\to\infty} n^{-2}h_{\Theta}\bigl(nQ\bigr),
where h_{\Theta} is the Weil height associated to a theta divisor \Theta on K.
Related to the canonical height is the height pairing
\langle-,-\rangle : A(L)\times A(L) \to \R
defined by \langle P,Q\rangle = \frac{1}{2}(\hat{h}(P+Q)-\hat{h}(P)-\hat{h}(Q)), which is a positive definite quadratic form on A(L)\otimes\R, used in defining the regulator of A/L.
Depends on: Definition 1.2.2 Definition 1.2.41 Definition 4.9.16 Definition 4.9.21 Definition 5.1.1 Definition 5.1.92
Canonical model. (LMFDB)
The canonical map of a curve C of genus g is the map to \mathbb{P}^{g-1} defined by the canonical class. For non-hyperelliptic curves of genus larger than 1, this map is an embedding, and its image is a normal curve called the canonical model of C.
Depends on: Definition 1.2.17 Definition 1.2.32
-
Polynomial.IsPadicCluster[complete] -
Polynomial.padicClusterSize[complete] -
Polynomial.padicClusterValDepth[complete] -
Polynomial.padicClusterRelValDepth[complete] -
Polynomial.IsPadicCluster.subset_or_subset_or_disjoint[complete] -
Polynomial.IsPadicCluster.isPadicCluster_padicClusterParent[complete]
Cluster picture. (LMFDB)
Let H be an elliptic or hyperelliptic curve over \Q given by an equation y^2 = f(x), and let p be an odd prime number. Then the cluster picture of H at p associated to this particular equation for H, is a graphical representation of the p-adic distances between the roots of f.
The size of a cluster is the number of roots of f(x) that it contains.
The depth of a cluster, is the valuation of the radius of a minimal p-adic disk containing all the roots in that particular cluster. The numbers that are depicted in a cluster picture represent the relative depth: the difference between the depth of a certain cluster and the smallest other cluster in which that certain cluster is contained. For the top cluster, which contains all the roots of f(x), the depth is depicted instead of the relative depth (as there is no relative depth in this case).
More information about cluster pictures can be found in A user's guide to the local arithmetic of hyperelliptic curves .
Depends on: Definition 1.2.32 Definition 4.1.4
Lean code for Definition1.2.12●6 declarations
Associated Lean declarations
-
Polynomial.IsPadicCluster[complete]
-
Polynomial.padicClusterSize[complete]
-
Polynomial.padicClusterValDepth[complete]
-
Polynomial.padicClusterRelValDepth[complete]
-
Polynomial.IsPadicCluster.subset_or_subset_or_disjoint[complete]
-
Polynomial.IsPadicCluster.isPadicCluster_padicClusterParent[complete]
-
Polynomial.IsPadicCluster[complete] -
Polynomial.padicClusterSize[complete] -
Polynomial.padicClusterValDepth[complete] -
Polynomial.padicClusterRelValDepth[complete] -
Polynomial.IsPadicCluster.subset_or_subset_or_disjoint[complete] -
Polynomial.IsPadicCluster.isPadicCluster_padicClusterParent[complete]
-
defdefined in LeanBridge/ForMathlib/NumberTheory/Padics/ClusterPicture.leancomplete
def Polynomial.IsPadicCluster (p : ℕ) [Fact (Nat.Prime p)] (f : Polynomial ℚ) (s : Set (PadicAlgCl p)) : Prop
def Polynomial.IsPadicCluster (p : ℕ) [Fact (Nat.Prime p)] (f : Polynomial ℚ) (s : Set (PadicAlgCl p)) : Prop
A **cluster** (LMFDB `ag.cluster_picture`) of a polynomial `f ∈ ℚ[X]` at a prime `p`: a nonempty set of roots of `f` in `ℚ̄_p` cut out by a closed `p`-adic disc. The **cluster picture** of `y² = f(x)` at `p` is the set of these clusters, with their depths.
-
defdefined in LeanBridge/ForMathlib/NumberTheory/Padics/ClusterPicture.leancomplete
def Polynomial.padicClusterSize (p : ℕ) [Fact (Nat.Prime p)] (s : Set (PadicAlgCl p)) : ℕ
def Polynomial.padicClusterSize (p : ℕ) [Fact (Nat.Prime p)] (s : Set (PadicAlgCl p)) : ℕ
The **size** (LMFDB `ag.cluster_picture`) of a cluster: the number of roots it contains.
-
defdefined in LeanBridge/ForMathlib/NumberTheory/Padics/ClusterPictureTree.leancomplete
def Polynomial.padicClusterValDepth (p : ℕ) [Fact (Nat.Prime p)] (s : Set (PadicAlgCl p)) : EReal
def Polynomial.padicClusterValDepth (p : ℕ) [Fact (Nat.Prime p)] (s : Set (PadicAlgCl p)) : EReal
The **depth** (LMFDB `ag.cluster_picture`) of a cluster `s`, as an extended real: the valuation `-log_p r` of the radius `r` of a minimal disc containing it, which is its diameter (`IsUltrametricDist.isLeast_diam`), and `∞` for a single root, which lies in a disc of radius `0`.
-
defdefined in LeanBridge/ForMathlib/NumberTheory/Padics/ClusterPictureTree.leancomplete
def Polynomial.padicClusterRelValDepth (p : ℕ) [Fact (Nat.Prime p)] (f : Polynomial ℚ) (s : Set (PadicAlgCl p)) : EReal
def Polynomial.padicClusterRelValDepth (p : ℕ) [Fact (Nat.Prime p)] (f : Polynomial ℚ) (s : Set (PadicAlgCl p)) : EReal
The **relative depth** (LMFDB `ag.cluster_picture`) of a cluster `s`, as an extended real: its depth minus the depth of the smallest cluster strictly containing it (`padicClusterParent`, a cluster by `IsPadicCluster.isPadicCluster_padicClusterParent`), so `∞` for a single root; for the top cluster of all the roots, which the cluster picture labels with its depth, its depth.
-
theoremdefined in LeanBridge/ForMathlib/NumberTheory/Padics/ClusterPictureTree.leancomplete
theorem Polynomial.IsPadicCluster.subset_or_subset_or_disjoint {p : ℕ} [Fact (Nat.Prime p)] {f : Polynomial ℚ} {s t : Set (PadicAlgCl p)} (hs : Polynomial.IsPadicCluster p f s) (ht : Polynomial.IsPadicCluster p f t) : s ⊆ t ∨ t ⊆ s ∨ Disjoint s t
theorem Polynomial.IsPadicCluster.subset_or_subset_or_disjoint {p : ℕ} [Fact (Nat.Prime p)] {f : Polynomial ℚ} {s t : Set (PadicAlgCl p)} (hs : Polynomial.IsPadicCluster p f s) (ht : Polynomial.IsPadicCluster p f t) : s ⊆ t ∨ t ⊆ s ∨ Disjoint s t
**Two clusters are nested or disjoint** (LMFDB `ag.cluster_picture`), as two closed `p`-adic discs are: the clusters form a tree under inclusion.
-
theoremdefined in LeanBridge/ForMathlib/NumberTheory/Padics/ClusterPictureTree.leancomplete
theorem Polynomial.IsPadicCluster.isPadicCluster_padicClusterParent {p : ℕ} [Fact (Nat.Prime p)] {f : Polynomial ℚ} {s : Set (PadicAlgCl p)} (hs : Polynomial.IsPadicCluster p f s) (hsR : s ≠ f.rootSet (PadicAlgCl p)) : Polynomial.IsPadicCluster p f (Polynomial.padicClusterParent p f s)
theorem Polynomial.IsPadicCluster.isPadicCluster_padicClusterParent {p : ℕ} [Fact (Nat.Prime p)] {f : Polynomial ℚ} {s : Set (PadicAlgCl p)} (hs : Polynomial.IsPadicCluster p f s) (hsR : s ≠ f.rootSet (PadicAlgCl p)) : Polynomial.IsPadicCluster p f (Polynomial.padicClusterParent p f s)
**The smallest cluster strictly containing a cluster is a cluster** (LMFDB `ag.cluster_picture`), for a cluster `s` other than the top cluster: the clusters strictly containing `s` form a nonempty finite chain, and `padicClusterParent` is its least element.
Cohen-Macaulay type. (LMFDB)
The Cohen-Macaulay type of an order R, is the minimal number of generators (as an R-module) of a canonical module of R.
Note that the trace dual ideal R^t =\{ a : \mathrm{Tr}(aR) \subseteq \mathbb{Z} \} is a canonical module for R. In particular, the Cohen-Macaulay type equals
\max \{ \dim_{R/\mathfrak{l}} \frac{R^t}{\mathfrak{l}R^t} \}_{\mathfrak{l}}, where \mathfrak{l} runs over the maximal ideals of R. The order is called Gorenstein if the Cohen-Macaulay type equals 1. This is the case precisely when every fractional R-ideal I with (I:I) is invertible.
Complex multiplication. (LMFDB)
A simple abelian variety of dimension g is said to have complex multiplication (CM) if its
endomorphism algebra is a CM field of degree 2g, or equivalently, if its endomorphism ring is an order in a CM field of degree 2g.
Depends on: Definition 1.2.2 Definition 1.2.20 Definition 1.2.21 Definition 1.2.22 Definition 1.2.27 Definition 5.1.9 Definition 5.1.14 Definition 5.1.57
Conductor of an abelian variety. (LMFDB)
The conductor of an abelian variety A over \Q is a positive integer N whose prime factors are the primes p where A has bad reduction. The power to which p divides N depends on the type of bad reduction; it can be expressed in terms of ramification in the \ell-adic representation associated to A for any prime \ell \ne p.
The conductor of an abelian variety over a number field is defined similarly; it is an ideal that is a product of positive powers of the prime ideals where A has bad reduction. The conductor of a curve C over a number field is defined to be the conductor of the Jacobian of C.
Isogenous abelian varieties have the same conductor.
Depends on: Definition 1.2.2 Definition 1.2.35
-
AlgebraicGeometry.Scheme.IsAlgebraicCurveOver[complete] -
AlgebraicGeometry.Scheme.isAlgebraicCurveOver_iff_isCurveOver_and_geometricallyIntegral[complete] -
AlgebraicGeometry.Scheme.IsAlgebraicCurveOver.isFunctionField[complete] -
AlgebraicGeometry.Scheme.IsVarietyOver[complete] -
AlgebraicGeometry.Scheme.IsCurveOver[complete]
Algebraic curve. (LMFDB)
An algebraic curve is an algebraic variety of dimension 1.
Tau Ceti Review: AlgebraicGeometry.Scheme.IsCurveOver.
Depends on: Definition 1.2.60
Lean code for Definition1.2.16●5 declarations
Associated Lean declarations
-
AlgebraicGeometry.Scheme.IsAlgebraicCurveOver[complete]
-
AlgebraicGeometry.Scheme.isAlgebraicCurveOver_iff_isCurveOver_and_geometricallyIntegral[complete]
-
AlgebraicGeometry.Scheme.IsAlgebraicCurveOver.isFunctionField[complete]
-
AlgebraicGeometry.Scheme.IsVarietyOver[complete]
-
AlgebraicGeometry.Scheme.IsCurveOver[complete]
-
AlgebraicGeometry.Scheme.IsAlgebraicCurveOver[complete] -
AlgebraicGeometry.Scheme.isAlgebraicCurveOver_iff_isCurveOver_and_geometricallyIntegral[complete] -
AlgebraicGeometry.Scheme.IsAlgebraicCurveOver.isFunctionField[complete] -
AlgebraicGeometry.Scheme.IsVarietyOver[complete] -
AlgebraicGeometry.Scheme.IsCurveOver[complete]
-
classdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/Basic.leancomplete
class AlgebraicGeometry.Scheme.IsAlgebraicCurveOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
class AlgebraicGeometry.Scheme.IsAlgebraicCurveOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
An **algebraic curve** over a field `K` (LMFDB `ag.curve`): an algebraic variety over `K`, that is a geometrically integral separated scheme of finite type over `K`, of dimension one. Unlike Tau Ceti's `AlgebraicGeometry.Scheme.IsCurveOver`, it need not be proper over `K`.
Extends
-
AlgebraicGeometry.Scheme.IsVarietyOver K
Methods
geometrically_isIntegral : AlgebraicGeometry.geometrically AlgebraicGeometry.IsIntegral (X ↘ AlgebraicGeometry.Spec ↧K)
Inherited from-
AlgebraicGeometry.Scheme.IsVarietyOver -
AlgebraicGeometry.GeometricallyIntegral
isClosedImmersion_diagonal : AlgebraicGeometry.IsClosedImmersion (CategoryTheory.Limits.pullback.diagonal (X ↘ AlgebraicGeometry.Spec ↧K))
Inherited from-
AlgebraicGeometry.Scheme.IsVarietyOver -
AlgebraicGeometry.IsSeparated
finiteType_appLE : ∀ {U : (AlgebraicGeometry.Spec ↧K).Opens}, AlgebraicGeometry.IsAffineOpen U → ∀ {V : X.Opens}, AlgebraicGeometry.IsAffineOpen V → ∀ (e : V ≤ (TopologicalSpace.Opens.map (X ↘ AlgebraicGeometry.Spec ↧K).base).obj U), (CommRingCat.Hom.hom (AlgebraicGeometry.Scheme.Hom.appLE (X ↘ AlgebraicGeometry.Spec ↧K) U V e)).FiniteType
Inherited from-
AlgebraicGeometry.Scheme.IsVarietyOver -
AlgebraicGeometry.LocallyOfFiniteType
isCompact_preimage : ∀ (U : Set ↥(AlgebraicGeometry.Spec ↧K)), IsOpen U → IsCompact U → IsCompact (⇑(X ↘ AlgebraicGeometry.Spec ↧K) ⁻¹' U)
Inherited from-
AlgebraicGeometry.Scheme.IsVarietyOver -
AlgebraicGeometry.QuasiCompact
topologicalKrullDim_eq_one : topologicalKrullDim ↥X = 1
An algebraic curve has dimension one.
-
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/Basic.leancomplete
theorem AlgebraicGeometry.Scheme.isAlgebraicCurveOver_iff_isCurveOver_and_geometricallyIntegral.{u} {K : Type u} [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.IsProper (X ↘ AlgebraicGeometry.Spec ↧K)] : AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K ↔ AlgebraicGeometry.Scheme.IsCurveOver K ∧ AlgebraicGeometry.GeometricallyIntegral (X ↘ AlgebraicGeometry.Spec ↧K)
theorem AlgebraicGeometry.Scheme.isAlgebraicCurveOver_iff_isCurveOver_and_geometricallyIntegral.{u} {K : Type u} [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.IsProper (X ↘ AlgebraicGeometry.Spec ↧K)] : AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K ↔ AlgebraicGeometry.Scheme.IsCurveOver K ∧ AlgebraicGeometry.GeometricallyIntegral (X ↘ AlgebraicGeometry.Spec ↧K)
A proper scheme over `K` is an algebraic curve if and only if it is a curve in the sense of Tau Ceti, an integral proper scheme of dimension one over `K`, that is geometrically integral.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/Basic.leancomplete
theorem AlgebraicGeometry.Scheme.IsAlgebraicCurveOver.isFunctionField.{u} {K : Type u} [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K] [AlgebraicGeometry.IsIntegral X] : TauCeti.IsFunctionField K ↑X.functionField
theorem AlgebraicGeometry.Scheme.IsAlgebraicCurveOver.isFunctionField.{u} {K : Type u} [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K] [AlgebraicGeometry.IsIntegral X] : TauCeti.IsFunctionField K ↑X.functionField
The function field of an algebraic curve over `K` is an algebraic function field of one variable over `K`.
-
classdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Basic.leancomplete
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
An **algebraic variety** over a field `K` (LMFDB `ag.variety`), as a scheme: a scheme over `K` that is geometrically integral, separated and of finite type (quasi-compact and locally of finite type) over `K`.
Extends
-
AlgebraicGeometry.GeometricallyIntegral (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.IsSeparated (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)
Methods
geometrically_isIntegral : AlgebraicGeometry.geometrically AlgebraicGeometry.IsIntegral (X ↘ AlgebraicGeometry.Spec ↧K)
Inherited from-
AlgebraicGeometry.GeometricallyIntegral
isClosedImmersion_diagonal : AlgebraicGeometry.IsClosedImmersion (CategoryTheory.Limits.pullback.diagonal (X ↘ AlgebraicGeometry.Spec ↧K))
Inherited from-
AlgebraicGeometry.IsSeparated
finiteType_appLE : ∀ {U : (AlgebraicGeometry.Spec ↧K).Opens}, AlgebraicGeometry.IsAffineOpen U → ∀ {V : X.Opens}, AlgebraicGeometry.IsAffineOpen V → ∀ (e : V ≤ (TopologicalSpace.Opens.map (X ↘ AlgebraicGeometry.Spec ↧K).base).obj U), (CommRingCat.Hom.hom (AlgebraicGeometry.Scheme.Hom.appLE (X ↘ AlgebraicGeometry.Spec ↧K) U V e)).FiniteType
Inherited from-
AlgebraicGeometry.LocallyOfFiniteType
isCompact_preimage : ∀ (U : Set ↥(AlgebraicGeometry.Spec ↧K)), IsOpen U → IsCompact U → IsCompact (⇑(X ↘ AlgebraicGeometry.Spec ↧K) ⁻¹' U)
Inherited from-
AlgebraicGeometry.QuasiCompact
-
-
classdefined in TauCeti/AlgebraicGeometry/Curves/Basic.leancomplete
class AlgebraicGeometry.Scheme.IsCurveOver.{u} {X : AlgebraicGeometry.Scheme} (k : Type u) [Field k] [X.Over (AlgebraicGeometry.Spec ↧k)] : Prop
class AlgebraicGeometry.Scheme.IsCurveOver.{u} {X : AlgebraicGeometry.Scheme} (k : Type u) [Field k] [X.Over (AlgebraicGeometry.Spec ↧k)] : Prop
A curve over a field is an integral, proper scheme of dimension one over that field.
Extends
-
AlgebraicGeometry.IsIntegral X -
AlgebraicGeometry.IsProper (X ↘ AlgebraicGeometry.Spec ↧k)
Methods
nonempty : Nonempty ↥X
Inherited from-
AlgebraicGeometry.IsIntegral
component_integral : ∀ (U : X.Opens) [Nonempty ↥↑U], IsDomain ↑(X.presheaf.obj (Opposite.op U))
Inherited from-
AlgebraicGeometry.IsIntegral
isClosedImmersion_diagonal : AlgebraicGeometry.IsClosedImmersion (CategoryTheory.Limits.pullback.diagonal (X ↘ AlgebraicGeometry.Spec ↧k))
Inherited from-
AlgebraicGeometry.IsProper -
AlgebraicGeometry.IsSeparated
universally_isClosedMap : (AlgebraicGeometry.topologically @IsClosedMap).universally (X ↘ AlgebraicGeometry.Spec ↧k)
Inherited from-
AlgebraicGeometry.IsProper -
AlgebraicGeometry.UniversallyClosed
finiteType_appLE : ∀ {U : (AlgebraicGeometry.Spec ↧k).Opens}, AlgebraicGeometry.IsAffineOpen U → ∀ {V : X.Opens}, AlgebraicGeometry.IsAffineOpen V → ∀ (e : V ≤ (TopologicalSpace.Opens.map (X ↘ AlgebraicGeometry.Spec ↧k).base).obj U), (CommRingCat.Hom.hom (AlgebraicGeometry.Scheme.Hom.appLE (X ↘ AlgebraicGeometry.Spec ↧k) U V e)).FiniteType
Inherited from-
AlgebraicGeometry.IsProper -
AlgebraicGeometry.LocallyOfFiniteType
topologicalKrullDim_eq_one : topologicalKrullDim ↥X = 1
The curve has dimension one.
-
Genus of a smooth curve. (LMFDB)
The genus of a smooth projective geometrically integral curve C defined over a field k is the dimension of the k-vector space of regular differentials H^0(C, \omega_C). When k=\C this coincides with the topological genus of the corresponding Riemann surface.
The quantity defined above is sometimes also called the algebraic genus or the geometric genus of C. Because of our assumption on the smoothness of C, it coincides with the arithmetic genus H^1(C,\mathcal{O}_C).
Depends on: Definition 1.2.51
Smoothness of an algebraic curve. (LMFDB)
Let C be an algebraic curve over a perfect field k. Then C is called smooth if the extension of C to the algebraic closure of k is non-singular at all of its points.
Depends on: Definition 1.2.16 Definition 1.2.56
-
AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve[complete] -
AlgebraicGeometry.Scheme.IsTrigonalAutomorphism[complete] -
AlgebraicGeometry.Scheme.IsCyclicTrigonalSubgroup[complete] -
AlgebraicGeometry.Scheme.isCyclicTrigonalSubgroup_iff_forall[complete] -
AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_iff_exists_isTrigonalAutomorphism[complete] -
AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_projectiveLineOver[complete]
Cyclic trigonal curve. (LMFDB)
An algebraic curve X is a cyclic trigonal curve if there is an order 3 subgroup H of its automorphism group such that the quotient curve X/H is isomorphic to \mathbb{P}^1.
A generator of such a subgroup H is called a trigonal automorphism.
Depends on: Definition 1.2.16 Definition 1.2.46 Definition 4.2.5
Lean code for Definition1.2.19●6 declarations
Associated Lean declarations
-
AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve[complete]
-
AlgebraicGeometry.Scheme.IsTrigonalAutomorphism[complete]
-
AlgebraicGeometry.Scheme.IsCyclicTrigonalSubgroup[complete]
-
AlgebraicGeometry.Scheme.isCyclicTrigonalSubgroup_iff_forall[complete]
-
AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_iff_exists_isTrigonalAutomorphism[complete]
-
AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_projectiveLineOver[complete]
-
AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve[complete] -
AlgebraicGeometry.Scheme.IsTrigonalAutomorphism[complete] -
AlgebraicGeometry.Scheme.IsCyclicTrigonalSubgroup[complete] -
AlgebraicGeometry.Scheme.isCyclicTrigonalSubgroup_iff_forall[complete] -
AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_iff_exists_isTrigonalAutomorphism[complete] -
AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_projectiveLineOver[complete]
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/CyclicTrigonalQuotient.leancomplete
def AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve.{u} {K : Type u} [Field K] (X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)) : Prop
def AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve.{u} {K : Type u} [Field K] (X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)) : Prop
An algebraic curve `X` over `K` is a **cyclic trigonal curve** (LMFDB `ag.cyclic_trigonal`) if some subgroup `H` of order three of its automorphism group has quotient curve `X / H` isomorphic to `ℙ¹_K`.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/CyclicTrigonalQuotient.leancomplete
def AlgebraicGeometry.Scheme.IsTrigonalAutomorphism.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (σ : CategoryTheory.Aut X) : Prop
def AlgebraicGeometry.Scheme.IsTrigonalAutomorphism.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (σ : CategoryTheory.Aut X) : Prop
An automorphism `σ` of an algebraic curve `X` over `K` is a **trigonal automorphism** (LMFDB `ag.cyclic_trigonal`) if it generates a subgroup `H` of order three of the automorphism group with quotient curve `X / H` isomorphic to `ℙ¹_K`.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/CyclicTrigonalQuotient.leancomplete
def AlgebraicGeometry.Scheme.IsCyclicTrigonalSubgroup.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (H : Subgroup (CategoryTheory.Aut X)) : Prop
def AlgebraicGeometry.Scheme.IsCyclicTrigonalSubgroup.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (H : Subgroup (CategoryTheory.Aut X)) : Prop
A subgroup `H` of the automorphism group of an algebraic curve `X` over `K` is a **cyclic trigonal subgroup** (LMFDB `ag.cyclic_trigonal`) if it has order three and the quotient curve `X / H` is isomorphic to `ℙ¹_K` over `K`: some quotient curve `π : X ⟶ Y` of `X` by `H` has `Y ≅ ℙ¹_K`, equivalently every one has.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/CyclicTrigonalQuotient.leancomplete
theorem AlgebraicGeometry.Scheme.isCyclicTrigonalSubgroup_iff_forall.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {H : Subgroup (CategoryTheory.Aut X)} [AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K] : AlgebraicGeometry.Scheme.IsCyclicTrigonalSubgroup H ↔ Nat.card ↥H = 3 ∧ ∀ (Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)) (π : X ⟶ Y), AlgebraicGeometry.Scheme.IsQuotientCurve H π → Nonempty (Y ≅ AlgebraicGeometry.Scheme.projectiveLineOver K)
theorem AlgebraicGeometry.Scheme.isCyclicTrigonalSubgroup_iff_forall.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {H : Subgroup (CategoryTheory.Aut X)} [AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K] : AlgebraicGeometry.Scheme.IsCyclicTrigonalSubgroup H ↔ Nat.card ↥H = 3 ∧ ∀ (Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)) (π : X ⟶ Y), AlgebraicGeometry.Scheme.IsQuotientCurve H π → Nonempty (Y ≅ AlgebraicGeometry.Scheme.projectiveLineOver K)
**A subgroup of order three is cyclic trigonal if and only if every quotient curve by it is isomorphic to `ℙ¹_K`**: the quotient curve exists and is unique up to isomorphism.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/CyclicTrigonalQuotient.leancomplete
theorem AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_iff_exists_isTrigonalAutomorphism.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} : AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve X ↔ ∃ σ, AlgebraicGeometry.Scheme.IsTrigonalAutomorphism σ
theorem AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_iff_exists_isTrigonalAutomorphism.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} : AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve X ↔ ∃ σ, AlgebraicGeometry.Scheme.IsTrigonalAutomorphism σ
**An algebraic curve is cyclic trigonal if and only if it has a trigonal automorphism**: a group of order three is cyclic, generated by any of its elements other than the identity.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/CyclicTrigonalProjectiveLine.leancomplete
theorem AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_projectiveLineOver.{u} (K : Type u) [Field K] {ζ : K} (hζ : IsPrimitiveRoot ζ 3) : AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve (AlgebraicGeometry.Scheme.projectiveLineOver K)
theorem AlgebraicGeometry.Scheme.isCyclicTrigonalCurve_projectiveLineOver.{u} (K : Type u) [Field K] {ζ : K} (hζ : IsPrimitiveRoot ζ 3) : AlgebraicGeometry.Scheme.IsCyclicTrigonalCurve (AlgebraicGeometry.Scheme.projectiveLineOver K)
**Over a field with a primitive cube root of unity `ζ`, the projective line `ℙ¹` is a cyclic trigonal curve** (LMFDB `ag.cyclic_trigonal`): the automorphism `x ↦ ζx` of `ℙ¹` generates a subgroup of order three of its automorphism group whose quotient curve is isomorphic to `ℙ¹`.
-
topologicalKrullDim[complete] -
TopologicalSpace.IrreducibleCloseds[complete]
Dimension of an algebraic variety. (LMFDB)
The dimension of an algebraic variety V is the maximal length d of a chain
V_0 \subset V_1 \subset \cdots \subset V_d
of distinct irreducible subvarieties of V.
Tau Ceti Review: topologicalKrullDim, TopologicalSpace.IrreducibleCloseds.
Depends on: Definition 1.2.33 Definition 1.2.60
Lean code for Definition1.2.20●2 definitions
Associated Lean declarations
-
topologicalKrullDim[complete]
-
TopologicalSpace.IrreducibleCloseds[complete]
-
topologicalKrullDim[complete] -
TopologicalSpace.IrreducibleCloseds[complete]
-
defdefined in Mathlib/Topology/KrullDimension.leancomplete
def topologicalKrullDim.{u_1} (T : Type u_1) [TopologicalSpace T] : WithBot ℕ∞
def topologicalKrullDim.{u_1} (T : Type u_1) [TopologicalSpace T] : WithBot ℕ∞
The Krull dimension of a topological space is the supremum of lengths of chains of closed irreducible sets.
-
structuredefined in Mathlib/Topology/Sets/Closeds.leancomplete
structure TopologicalSpace.IrreducibleCloseds.{u_4} (α : Type u_4) [TopologicalSpace α] : Type u_4
structure TopologicalSpace.IrreducibleCloseds.{u_4} (α : Type u_4) [TopologicalSpace α] : Type u_4
The type of irreducible closed subsets of a topological space.
Fields
carrier : Set α
the carrier set, i.e. the points in this set
isIrreducible' : IsIrreducible self.carrier
isClosed' : IsClosed self.carrier
Endomorphism algebra. (LMFDB)
The endomorphism algebra of an abelian variety A is the \Q-algebra \textrm{End}(A)\otimes\Q, where \textrm{End}(A) is the endomorphism ring of A.
Tau Ceti Review: TauCeti.AlgebraicGeometry.AbelianVariety.End.
Depends on: Definition 1.2.2 Definition 1.2.22
Lean code for Definition1.2.21●1 definition
Associated Lean declarations
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
The endomorphism ring of an abelian variety `A`: the endomorphisms of `A`, with addition the pointwise group law of `A` and multiplication composition. Since the pointwise group law on `A ⟶ A` is written multiplicatively (see `AbelianVariety.Hom.instCommGroup`) while a ring is written additively, this is the additive reindexing of the group `A ⟶ A`; use `AbelianVariety.End.toHom` and `AbelianVariety.End.ofHom` to pass between an element of the ring and the endomorphism it denotes.
Endomorphism ring. (LMFDB)
An endomorphism of an abelian variety A over a field k is a homomorphism \varphi \colon A \to A defined over k. The set of endomorphisms of an abelian variety A can be given the structure of a ring in which addition is defined pointwise (using the group operation of A) and multiplication is composition; this ring is called the endomorphism ring of A, denoted \textrm{End}(A).
For endomorphisms defined over an extension of k, we instead speak about the geometric endomorphism ring.
Tau Ceti Review: TauCeti.AlgebraicGeometry.AbelianVariety.End.
Depends on: Definition 1.2.2
Lean code for Definition1.2.22●1 definition
Associated Lean declarations
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
The endomorphism ring of an abelian variety `A`: the endomorphisms of `A`, with addition the pointwise group law of `A` and multiplication composition. Since the pointwise group law on `A ⟶ A` is written multiplicatively (see `AbelianVariety.Hom.instCommGroup`) while a ring is written additively, this is the additive reindexing of the group `A ⟶ A`; use `AbelianVariety.End.toHom` and `AbelianVariety.End.ofHom` to pass between an element of the ring and the endomorphism it denotes.
Point counts of a variety. (LMFDB)
If X is a variety defined over a finite field \mathbb{F}_q, one can show that it will have finitely many points that are defined over that field. Upon extending the base field to \mathbb{F}_{q^2}, \mathbb{F}_{q^3}, \mathbb{F}_{q^4}, etc. the number of points of X defined over those fields remains finite, as long as we consider only field extensions of finite degree over \mathbb{F}_q.
Depends on: Definition 1.2.8 Definition 1.2.60
Lean code for Definition1.2.23●3 declarations
Associated Lean declarations
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/LocallySolvable.leancomplete
def AlgebraicGeometry.Scheme.PointOver.{u} (K : Type u) [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] (L : Type u) [CommRing L] [Algebra K L] : Type u
def AlgebraicGeometry.Scheme.PointOver.{u} (K : Type u) [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] (L : Type u) [CommRing L] [Algebra K L] : Type u
The **`L`-points** of a scheme `X` over a field `K`, for a `K`-algebra `L`: the morphisms `Spec L ⟶ X` over `Spec K`. For `L = K` they are the **rational points** `X(K)` (LMFDB `g2c.all_rational_points`).
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/FiniteFieldPoints.leancomplete
theorem AlgebraicGeometry.Scheme.finite_pointOver.{u} (X : AlgebraicGeometry.Scheme) (L : Type u) [Field L] {K : Type u} [Field K] [Finite K] [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)] [Algebra K L] [FiniteDimensional K L] : Finite (AlgebraicGeometry.Scheme.PointOver K X L)
theorem AlgebraicGeometry.Scheme.finite_pointOver.{u} (X : AlgebraicGeometry.Scheme) (L : Type u) [Field L] {K : Type u} [Field K] [Finite K] [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)] [Algebra K L] [FiniteDimensional K L] : Finite (AlgebraicGeometry.Scheme.PointOver K X L)
**A scheme `X` of finite type over a finite field `K` has finitely many points over every finite extension `L` of `K`** (LMFDB `ag.fq.point_counts`): in particular finitely many rational points, and finitely many points over `𝔽_{q^n}` for `K = 𝔽_q`. -
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/FiniteFieldPoints.leancomplete
theorem AlgebraicGeometry.Scheme.finite_hom_spec_of_finiteType.{u} (X : AlgebraicGeometry.Scheme) (L : Type u) [Field L] [CompactSpace ↥X] [Finite L] (hX : ∀ (j : X.affineOpenCover.I₀), (Int.castRingHom ↑(X.affineOpenCover.X j)).FiniteType) : Finite (AlgebraicGeometry.Spec ↧L ⟶ X)
theorem AlgebraicGeometry.Scheme.finite_hom_spec_of_finiteType.{u} (X : AlgebraicGeometry.Scheme) (L : Type u) [Field L] [CompactSpace ↥X] [Finite L] (hX : ∀ (j : X.affineOpenCover.I₀), (Int.castRingHom ↑(X.affineOpenCover.X j)).FiniteType) : Finite (AlgebraicGeometry.Spec ↧L ⟶ X)
-
AlgebraicGeometry.Scheme.geometricComponents[complete] -
AlgebraicGeometry.Scheme.geometricComponents_eq_range_connectedComponent[complete] -
AlgebraicGeometry.Scheme.finite_geometricComponents[complete] -
AlgebraicGeometry.Scheme.geometricGaloisPerm[complete] -
AlgebraicGeometry.Scheme.irreducibleComponents_eq_range_connectedComponent[complete] -
AlgebraicGeometry.Scheme.geometricBaseChangeScheme[complete]
Geometric component. (LMFDB)
A geometric component of a smooth scheme X of finite type over a field k is an irreducible component of the base change X_{\overline{k}}. (Because X_{\overline{k}} is smooth, irreducible components are the same as connected components.)
The set \pi_0(X_{\overline{k}}) of geometric components is a finite set with an action of the absolute Galois group \Gal_k.
Depends on: Definition 8.3.56
Lean code for Definition1.2.24●6 declarations
Associated Lean declarations
-
AlgebraicGeometry.Scheme.geometricComponents[complete]
-
AlgebraicGeometry.Scheme.geometricComponents_eq_range_connectedComponent[complete]
-
AlgebraicGeometry.Scheme.finite_geometricComponents[complete]
-
AlgebraicGeometry.Scheme.geometricGaloisPerm[complete]
-
AlgebraicGeometry.Scheme.irreducibleComponents_eq_range_connectedComponent[complete]
-
AlgebraicGeometry.Scheme.geometricBaseChangeScheme[complete]
-
AlgebraicGeometry.Scheme.geometricComponents[complete] -
AlgebraicGeometry.Scheme.geometricComponents_eq_range_connectedComponent[complete] -
AlgebraicGeometry.Scheme.finite_geometricComponents[complete] -
AlgebraicGeometry.Scheme.geometricGaloisPerm[complete] -
AlgebraicGeometry.Scheme.irreducibleComponents_eq_range_connectedComponent[complete] -
AlgebraicGeometry.Scheme.geometricBaseChangeScheme[complete]
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/GeometricComponent.leancomplete
def AlgebraicGeometry.Scheme.geometricComponents.{u} (K : Type u) [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] : Set (Set ↥(AlgebraicGeometry.Scheme.geometricBaseChangeScheme K X))
def AlgebraicGeometry.Scheme.geometricComponents.{u} (K : Type u) [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] : Set (Set ↥(AlgebraicGeometry.Scheme.geometricBaseChangeScheme K X))
The **geometric components** (LMFDB `ag.geom_component`) of a scheme `X` over a field `K`: the irreducible components of its base change `X_K̄` to an algebraic closure of `K`.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/GeometricComponent.leancomplete
theorem AlgebraicGeometry.Scheme.geometricComponents_eq_range_connectedComponent.{u} {K : Type u} [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.Smooth (X ↘ AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)] : AlgebraicGeometry.Scheme.geometricComponents K X = Set.range connectedComponent
theorem AlgebraicGeometry.Scheme.geometricComponents_eq_range_connectedComponent.{u} {K : Type u} [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.Smooth (X ↘ AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)] : AlgebraicGeometry.Scheme.geometricComponents K X = Set.range connectedComponent
**The geometric components of a smooth scheme `X` of finite type over a field `K` are the connected components of `X_K̄`** (LMFDB `ag.geom_component`): `X_K̄` is smooth over `K̄` and Noetherian.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/GeometricComponent.leancomplete
theorem AlgebraicGeometry.Scheme.finite_geometricComponents.{u} {K : Type u} [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.Smooth (X ↘ AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)] : (AlgebraicGeometry.Scheme.geometricComponents K X).Finite
theorem AlgebraicGeometry.Scheme.finite_geometricComponents.{u} {K : Type u} [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.Smooth (X ↘ AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)] : (AlgebraicGeometry.Scheme.geometricComponents K X).Finite
**A smooth scheme of finite type over a field has finitely many geometric components** (LMFDB `ag.geom_component`): `X_K̄` is Noetherian.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/GeometricComponent.leancomplete
def AlgebraicGeometry.Scheme.geometricGaloisPerm.{u} {K : Type u} [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] : Gal(AlgebraicClosure K/K) →* Equiv.Perm ↑(AlgebraicGeometry.Scheme.geometricComponents K X)
def AlgebraicGeometry.Scheme.geometricGaloisPerm.{u} {K : Type u} [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] : Gal(AlgebraicClosure K/K) →* Equiv.Perm ↑(AlgebraicGeometry.Scheme.geometricComponents K X)
The **action of the absolute Galois group `Gal(K̄/K)` on the geometric components** (LMFDB `ag.geom_component`) of a scheme `X` over `K`: `σ` sends a component `Z` of `X_K̄` to its preimage under the automorphism `id × Spec(σ)` of `X_K̄ = X ×_K K̄`, a homeomorphism.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/GeometricComponent.leancomplete
theorem AlgebraicGeometry.Scheme.irreducibleComponents_eq_range_connectedComponent.{u} {K : Type u} [Field K] {Y : AlgebraicGeometry.Scheme} [TopologicalSpace.NoetherianSpace ↥Y] (f : Y ⟶ AlgebraicGeometry.Spec ↧K) [AlgebraicGeometry.Smooth f] : irreducibleComponents ↥Y = Set.range connectedComponent
theorem AlgebraicGeometry.Scheme.irreducibleComponents_eq_range_connectedComponent.{u} {K : Type u} [Field K] {Y : AlgebraicGeometry.Scheme} [TopologicalSpace.NoetherianSpace ↥Y] (f : Y ⟶ AlgebraicGeometry.Spec ↧K) [AlgebraicGeometry.Smooth f] : irreducibleComponents ↥Y = Set.range connectedComponent
**The irreducible components of a Noetherian scheme smooth over a field are its connected components**: a connected component is open, and a connected open subscheme of a scheme smooth over a field is irreducible.
-
abbrevdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Scheme/GeometricComponent.leancomplete
abbrev AlgebraicGeometry.Scheme.geometricBaseChangeScheme.{u} (K : Type u) [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] : AlgebraicGeometry.Scheme
abbrev AlgebraicGeometry.Scheme.geometricBaseChangeScheme.{u} (K : Type u) [Field K] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧K)] : AlgebraicGeometry.Scheme
The base change `X_K̄ = X ×_K K̄` of a scheme `X` over a field `K` to the algebraic closure `K̄` of `K`, as a scheme: the fibre product of `X ⟶ Spec K` and `Spec K̄ ⟶ Spec K`, the scheme underlying LeanBridge's `AlgebraicGeometry.Scheme.geometricBaseChange`.
Geometric endomorphism algebra. (LMFDB)
For an abelian variety A over a field F, the geometric endomorphism algebra of A is the \Q-algebra \End(A_{\overline{F}}) \otimes \Q, where \End(A_{\overline{F}}) is the geometric endomorphism ring of A.
Tau Ceti Review: TauCeti.AlgebraicGeometry.AbelianVariety.End, TauCeti.AlgebraicGeometry.AbelianVariety.End.baseChange, TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.
Depends on: Definition 1.2.26
Lean code for Definition1.2.25●3 definitions
Associated Lean declarations
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
The endomorphism ring of an abelian variety `A`: the endomorphisms of `A`, with addition the pointwise group law of `A` and multiplication composition. Since the pointwise group law on `A ⟶ A` is written multiplicatively (see `AbelianVariety.Hom.instCommGroup`) while a ring is written additively, this is the additive reindexing of the group `A ⟶ A`; use `AbelianVariety.End.toHom` and `AbelianVariety.End.ofHom` to pass between an element of the ring and the endomorphism it denotes.
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/BaseChange.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : A.End →+* (A.baseChange L).End
def TauCeti.AlgebraicGeometry.AbelianVariety.End.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : A.End →+* (A.baseChange L).End
Extension of the base field along `K → L`, as a ring homomorphism between endomorphism rings. Addition in an endomorphism ring is the pointwise group law of the abelian variety and multiplication is composition, so additivity is `AbelianVariety.Hom.baseChange_mul` and multiplicativity is `AbelianVariety.Hom.baseChange_comp` (composition being taken in the reversed order in which `AbelianVariety.End` multiplies). The action is characterized by `AbelianVariety.End.toHom_baseChange` and `AbelianVariety.End.baseChange_ofHom`, so the implementation is not exposed.
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : TauCeti.AlgebraicGeometry.AbelianVariety L
def TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : TauCeti.AlgebraicGeometry.AbelianVariety L
The base change of an abelian variety along a field extension `K → L`, obtained by pulling back the group scheme along `Spec L → Spec K`. Properness and geometric integrality are stable under base change, and the monoidal pullback functor carries the group-object structure (`Functor.grpObjObj`), so the result is again an abelian variety. This realizes the roadmap's base-change compatibility of the Jacobian at the level of abelian varieties.
Geometric endomorphism ring. (LMFDB)
For an abelian variety A over a field F, the geometric endomorphism ring of A is \End(A_{\overline{F}}), the endomorphism ring of the base change of A to an algebraic closure \overline{F} of F.
Tau Ceti Review: TauCeti.AlgebraicGeometry.AbelianVariety.End, TauCeti.AlgebraicGeometry.AbelianVariety.End.baseChange, TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.
Depends on: Definition 1.2.22
Lean code for Definition1.2.26●3 definitions
Associated Lean declarations
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
The endomorphism ring of an abelian variety `A`: the endomorphisms of `A`, with addition the pointwise group law of `A` and multiplication composition. Since the pointwise group law on `A ⟶ A` is written multiplicatively (see `AbelianVariety.Hom.instCommGroup`) while a ring is written additively, this is the additive reindexing of the group `A ⟶ A`; use `AbelianVariety.End.toHom` and `AbelianVariety.End.ofHom` to pass between an element of the ring and the endomorphism it denotes.
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/BaseChange.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : A.End →+* (A.baseChange L).End
def TauCeti.AlgebraicGeometry.AbelianVariety.End.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : A.End →+* (A.baseChange L).End
Extension of the base field along `K → L`, as a ring homomorphism between endomorphism rings. Addition in an endomorphism ring is the pointwise group law of the abelian variety and multiplication is composition, so additivity is `AbelianVariety.Hom.baseChange_mul` and multiplicativity is `AbelianVariety.Hom.baseChange_comp` (composition being taken in the reversed order in which `AbelianVariety.End` multiplies). The action is characterized by `AbelianVariety.End.toHom_baseChange` and `AbelianVariety.End.baseChange_ofHom`, so the implementation is not exposed.
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : TauCeti.AlgebraicGeometry.AbelianVariety L
def TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : TauCeti.AlgebraicGeometry.AbelianVariety L
The base change of an abelian variety along a field extension `K → L`, obtained by pulling back the group scheme along `Spec L → Spec K`. Properness and geometric integrality are stable under base change, and the monoidal pullback functor carries the group-object structure (`Functor.grpObjObj`), so the result is again an abelian variety. This realizes the roadmap's base-change compatibility of the Jacobian at the level of abelian varieties.
Geometrically simple. (LMFDB)
An abelian variety over a field k is geometrically (or absolutely) simple if it is simple when viewed as a variety over \bar k.
Depends on: Definition 1.2.2 Definition 1.2.55
Gonality of a curve. (LMFDB)
The gonality (or k-gonality) of an integral algebraic curve X over a field k is the minimal degree of a dominant k-morphism X \to \mathbb{P}^1_k. Equivalently, it is the minimum of [k(X):k(t)] as t ranges over (transcendental) elements of the function field k(X) of X.
The base extension of any dominant morphism X \to \mathbb{P}^1_k is a dominant morphism X_{\overline{k}} \to \mathbb{P}^1_{\overline{k}}, so the geometric gonality of X is less than or equal to the k-gonality of X.
Depends on: Definition 1.2.16
Geometric gonality. (LMFDB)
Let X be a geometrically integral algebraic curve over a field k.
Let \overline{k} be an algebraic closure of k.
Let X_{\overline{k}} be the base extension.
The geometric gonality (or \overline{k}-gonality) of X is the gonality of X_{\overline{k}}, that is, the minimal degree of a dominant morphism X_{\overline{k}} \to \mathbb{P}^1_{\overline{k}}.
Depends on: Definition 1.2.16 Definition 1.2.28
Good and bad reduction. (LMFDB)
A smooth proper variety X over a number field K is said to have good reduction at a prime \mathfrak{p} if it has a model over \mathcal{O}_{K, \mathfrak{p}} whose reduction modulo \mathfrak{p} is a smooth variety over the residue field; more precisely, X has good reduction if it is the generic fiber of a smooth proper scheme over \mathcal{O}_{K, \mathfrak{p}}. Otherwise, \mathfrak{p} is said to be a prime of bad reduction.
The set of primes at which a given X has bad reduction is finite.
For an abelian variety X, the primes of bad reduction are the primes that divide the conductor of X.
If a curve has good reduction at \mathfrak{p}, then its Jacobian does too. The converse need not hold.
Depends on: Definition 1.2.2 Definition 1.2.15 Definition 1.2.35 Definition 1.2.60 Definition 5.1.1 Definition 5.1.64
Holomorphic Euler characteristic. (LMFDB)
The holomorphic Euler characteristic of a projective scheme X is the alternating sum \chi(X)=\chi(\mathcal{O}_X) = \sum_{i=0}^{\dim X} (-1)^i \dim H^i(X, \mathcal{O}_X).
See also the arithmetic genus.
Tau Ceti Review: AlgebraicGeometry.Scheme.Modules.eulerCharBelow.
Lean code for Definition1.2.31●1 definition
Associated Lean declarations
-
defdefined in TauCeti/AlgebraicGeometry/Cohomology/EulerCharacteristic.leancomplete
def AlgebraicGeometry.Scheme.Modules.eulerCharBelow.{u} (k : Type u) [Field k] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧k)] (M : X.Modules) (n : ℕ) : ℤ
def AlgebraicGeometry.Scheme.Modules.eulerCharBelow.{u} (k : Type u) [Field k] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧k)] (M : X.Modules) (n : ℕ) : ℤ
The alternating sum `∑_{i < n} (-1)ⁱ dim_k Hⁱ(X, M)` of the dimensions of the cohomology of a sheaf of modules on a scheme over a field, truncated at degree `n`. No finiteness assumption is imposed, just as none is imposed on Mathlib's `HomologicalComplex.eulerChar`: a degree `i < n` in which `Hⁱ(X, M)` is infinite-dimensional contributes the junk value `finrank k Hⁱ(X, M) = 0`. For this sum to be the Euler characteristic `χ(X, M)` it is enough that the cohomology be finite-dimensional in degrees `< n` and vanish in degrees `≥ n`; that is a sufficient condition and not a necessary one, since a truncation that cuts off finite-dimensional cohomology whose own alternating sum vanishes computes `χ(X, M)` just as well. On a curve, the relevant truncation is `n = 2`.
Hyperelliptic curve. (LMFDB)
A hyperelliptic curve X over a field k is a smooth projective algebraic curve of genus g\ge 2 that admits a 2-to-1 map X\to \mathbb{P}^1 defined over the algebraic closure \bar k.
If X is a hyperelliptic curve over k, then the canonical map X \to \mathbb{P}^{g-1} is a 2-to-1 map onto a smooth genus 0 curve Y. The curve Y is isomorphic to \mathbb{P}^1 if and only if Y has a k-rational point.
If X admits a 2-to-1 map to \mathbb{P}^1 that is defined over k, then X has a Weierstrass model of the form y^2+h(x)y=f(x); when the characteristic of k is not 2 one can complete the square to put this model in the form y^2=f(x).
In general, there is always a model for X in \mathbb{P}^3 of the form
h(x,y,z)=0\qquad w^2=f(x,y,z)
where h(x,y,z) is a homogeneous polynomial of degree 2 (a conic) and f(x,y,z) is a homogeneous polynomial of degree g+1.
Depends on: Definition 1.2.16 Definition 1.2.17
-
IrreducibleSpace[complete] -
AlgebraicGeometry.GeometricallyIrreducible[complete]
Irreducible variety. (LMFDB)
A variety defined over a field F is irreducible if it is nonempty and cannot be decomposed as the union of two strictly smaller varieties over F. It is geometrically irreducible if it remains irreducible when seen as a variety over the algebraic closure of F.
Tau Ceti Review: IrreducibleSpace, AlgebraicGeometry.GeometricallyIrreducible.
Depends on: Definition 1.2.60
Lean code for Definition1.2.33●2 definitions
Associated Lean declarations
-
IrreducibleSpace[complete]
-
AlgebraicGeometry.GeometricallyIrreducible[complete]
-
IrreducibleSpace[complete] -
AlgebraicGeometry.GeometricallyIrreducible[complete]
-
classdefined in Mathlib/Topology/Irreducible.leancomplete
class IrreducibleSpace.{u_3} (X : Type u_3) [TopologicalSpace X] : Prop
class IrreducibleSpace.{u_3} (X : Type u_3) [TopologicalSpace X] : Prop
An irreducible space is one that is nonempty and where there is no non-trivial pair of disjoint opens.
Extends
-
PreirreducibleSpace X
Methods
isPreirreducible_univ : IsPreirreducible Set.univ
Inherited from-
PreirreducibleSpace
toNonempty : Nonempty X
-
-
classdefined in Mathlib/AlgebraicGeometry/Geometrically/Irreducible.leancomplete
class AlgebraicGeometry.GeometricallyIrreducible.{u_1} {X Y : AlgebraicGeometry.Scheme} (f : X ⟶ Y) : Prop
class AlgebraicGeometry.GeometricallyIrreducible.{u_1} {X Y : AlgebraicGeometry.Scheme} (f : X ⟶ Y) : Prop
We say that morphism `f : X ⟶ Y` is geometrically irreducible if for all `Spec K ⟶ Y` with `K` a field, `X ×[Y] Spec K` is irreducible.
Methods
geometrically_irreducibleSpace : AlgebraicGeometry.geometrically (fun x => IrreducibleSpace ↥x) f
- No associated Lean code or declarations.
Isolated point. (LMFDB)
A closed point x on a curve C is isolated if it is not contained in a family of effective degree d divisors parametrized by \mathbb{P}^1 or a positive rank abelian variety.
Jacobian of a curve. (LMFDB)
The Jacobian of a (smooth, projective, geometrically integral) curve X of genus g over a field k is a g-dimensional principally polarized abelian variety J that is canonically associated to X.
If X has a k-rational point, then J(k) is isomorphic to the group of degree zero divisors on X modulo linear equivalence. A choice of rational point on X determines a morphism X \to J called an Abel-Jacobi map; it is an embedding if and only if g \ge 1, and an isomorphism if and only if g=1.
The Torelli theorem states that if X and Y are curves whose Jacobians are isomorphic as *principally polarized* abelian varieties, then X and Y are isomorphic. It is possible, however, for non-isomorphic curves to have Jacobians that are isomorphic as unpolarized abelian varieties.
Depends on: Definition 1.2.2
- No associated Lean code or declarations.
Kodaira dimension. (LMFDB)
Let X be a nonsingular complex algebraic variety with canonical divisor K. For each d \in \mathbb{Z}_{\geq 0}, the d^\text{th} plurigenus of X is P_d \colonequals \dim H^0(X, K^{\otimes d}). The global sections of K^{\otimes d} define a rational map
\varphi_d: X \to \mathbb{P}(H^0(X,K^{\otimes d})) \cong \mathbb{P}^{P_d-1} \, .
The Kodaira dimension \kappa(X) is defined to be -1 if P_d = 0 for all d, and
\kappa(X) \colonequals \sup_d \, \dim(\varphi_d(X))
otherwise.
Minimal field of definition. (LMFDB)
Let V/k be an algebraic variety defined over a field k and let S be the set of subfields k_0\subseteq k for which there exists an algebraic variety V_0/k_0 whose base change to k is isomorphic to V.
Any field k_0\in S that contains no other elements of S is a minimal field of definition for V.
In general, an algebraic variety may have more than one minimal field of definition; this does not occur for elliptic curves but it does occur for curves of genus 2.
Depends on: Definition 1.2.7 Definition 1.2.17 Definition 1.2.60 Definition 1.1.30
Modular curve X_0(N). (LMFDB)
Let N \ge 1. The *modular curve* X_0(N) is an algebraic curve defined over \Q (or even \Z[1/N]) whose points over any algebraically closed field of characteristic not dividing N correspond to isomorphism classes of pairs (E,\phi), where E is an elliptic curve and \phi is an isogeny with domain E and kernel a cyclic group of order N, with the exception of particular points called *cusps* which correspond to degenerate such pairs.
The complex manifold X_0(N)(\C) is biholomorphic to the quotient \Gamma_0(N) \backslash \mathcal{H}^* of the completed upper half plane.
Depends on: Definition 1.2.16 Definition 4.1.4 Definition 4.1.36 Definition 3.6.27
Modular curve X_1(N). (LMFDB)
Let N \ge 1. The *modular curve* X_1(N) is an algebraic curve defined over \Q (or even \Z[1/N]) whose points over any algebraically closed field k of characteristic not dividing N correspond to isomorphism classes of pairs (E,P), where E is an elliptic curve over k and P \in E(k) is a torsion point of order exactly N, with the exception of particular points called *cusps* which correspond to degenerate such pairs. If N \ge 4, the same description of points is valid even if k is not algebraically closed.
The complex manifold X_1(N)(\C) is biholomorphic to the quotient \Gamma_1(N) \backslash \mathcal{H}^* of the completed upper half plane.
There is an action of the group (\Z/N\Z)^* on X_1(N),
in which c \bmod N maps (E,P) to (E,cP).
The subgroup \{\pm 1\} acts trivially, because (E,-P) is isomorphic to (E,P) via [-1].
The quotient of X_1(N) by (\Z/N\Z)^* / \{\pm1\} is the
modular curve X_0(N).
Depends on: Definition 1.2.16 Definition 1.2.38 Definition 4.1.4 Definition 3.6.27
Modular curve $X_{text{ns. (LMFDB)
Let N \ge 1. The curve X_{\text{ns}}^{+}(N) is the modular curve X(\Gamma_{\text{ns}}^{+}(N)) where \Gamma_{\text{ns}}^{+}(N) is the normalizer of the non-split Cartan subgroup \Gamma_{\text{ns}}(N).
Depends on: Definition 1.1.17 Definition 4.4.1
Mordell-Weil group of an abelian variety. (LMFDB)
The Mordell-Weil group of an abelian variety A over a number field K is its group of K-rational points A(K).
Weil, building on Mordell's theorem for elliptic curves over \Q, proved that the abelian group A(K) is finitely generated. Thus
A(K)\simeq \Z^r \oplus T,
where r is a nonnegative integer called the Mordell-Weil rank of A, and T is a finite abelian group called the torsion subgroup.
The torsion subgroup T is the product of at most 2g cyclic groups, where g is the dimension of A.
Depends on: Definition 1.2.2 Definition 1.2.20
Plane model. (LMFDB)
A plane model of a smooth projective curve X is a closed curve f(x,y,z)=0 in \mathbb{P}^2 that is birational to X. Such a model is singular if the zero locus of f and its partial derivatives is non-empty, otherwise it is smooth.
Potential good reduction. (LMFDB)
A smooth proper variety X over a number field K is said to have potential good reduction at a prime \mathfrak{p} if there is a finite extension L \supset K such that the base change X_L has good reduction at all primes \mathfrak{q} of L above \mathfrak{p}.
Tau Ceti Review: WeierstrassCurve.HasPotentialGoodReduction.
Depends on: Definition 1.2.7 Definition 1.2.30 Definition 1.2.60 Definition 5.1.1 Definition 5.1.64
Lean code for Definition1.2.43●3 definitions
Associated Lean declarations
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/GoodReduction.leancomplete
def AlgebraicGeometry.Scheme.HasPotentialGoodReductionAt.{u} {K : Type u} [Field K] {X : AlgebraicGeometry.Scheme} (toK : X ⟶ AlgebraicGeometry.Spec ↧K) (𝔭 : IsDedekindDomain.HeightOneSpectrum (NumberField.RingOfIntegers K)) : Prop
def AlgebraicGeometry.Scheme.HasPotentialGoodReductionAt.{u} {K : Type u} [Field K] {X : AlgebraicGeometry.Scheme} (toK : X ⟶ AlgebraicGeometry.Spec ↧K) (𝔭 : IsDedekindDomain.HeightOneSpectrum (NumberField.RingOfIntegers K)) : Prop
A scheme `X` over a number field `K`, such as a smooth proper variety, has **potential good reduction** (LMFDB `ag.potential_good_reduction`) at a prime `𝔭` of `K` if there is a finite extension `L / K`, a number field, such that the base change `X_L = X ×_K L` has good reduction at every prime `𝔮` of `L` above `𝔭`.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/GoodReduction.leancomplete
def AlgebraicGeometry.Scheme.HasGoodReductionAt.{u} {O K : Type u} [CommRing O] [IsDedekindDomain O] [Field K] [Algebra O K] [IsFractionRing O K] {X : AlgebraicGeometry.Scheme} (toK : X ⟶ AlgebraicGeometry.Spec ↧K) (v : IsDedekindDomain.HeightOneSpectrum O) : Prop
def AlgebraicGeometry.Scheme.HasGoodReductionAt.{u} {O K : Type u} [CommRing O] [IsDedekindDomain O] [Field K] [Algebra O K] [IsFractionRing O K] {X : AlgebraicGeometry.Scheme} (toK : X ⟶ AlgebraicGeometry.Spec ↧K) (v : IsDedekindDomain.HeightOneSpectrum O) : Prop
A scheme `X` over the fraction field `K` of a Dedekind domain `O`, such as a smooth proper variety over a number field, has **good reduction** (LMFDB `ag.good_reduction`) at a height-one prime `v` of `O` if it is the generic fibre of a smooth proper scheme over the discrete valuation ring `O_v`: it has a model over `O_v` (Tau Ceti's `TauCeti.Model`, flat and finitely presented with an identification of its generic fibre with `X`) that is proper and smooth over `O_v`.
-
defdefined in TauCeti/AlgebraicGeometry/EllipticCurve/MinimalModel/PotentialGoodReduction.leancomplete
def WeierstrassCurve.HasPotentialGoodReduction.{u, v} (R : Type v) [CommRing R] {K : Type u} [Field K] [Algebra R K] (W : WeierstrassCurve K) : Prop
def WeierstrassCurve.HasPotentialGoodReduction.{u, v} (R : Type v) [CommRing R] {K : Type u} [Field K] [Algebra R K] (W : WeierstrassCurve K) : Prop
**Potential good reduction**: after some finite extension `L` of `K`, at some discrete valuation ring `S` with fraction field `L` dominating `R`, a minimal equation of `W` has good reduction. The maps `R → S → L` and `R → K → L` are required to agree, so that `S` lies over `R`. The field `L` and the ring `S` are taken in the universe of `K`. Over a complete `R`, the integral closure of `R` in `L` is the only such ring `S`, so this is the usual notion of good reduction over the ring of integers of a finite extension.
Primitive algebraic variety. (LMFDB)
An algebraic variety is primitive if it is not a base-change of an algebraic variety defined over a subfield.
Depends on: Definition 1.2.7 Definition 1.2.60
Lean code for Definition1.2.44●3 declarations
Associated Lean declarations
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/FieldOfDefinition.leancomplete
def AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield.{u} (L : Type u) [Field L] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧L)] : Prop
def AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield.{u} (L : Type u) [Field L] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧L)] : Prop
A variety `X` over a field `L` **is a base change** (LMFDB `ag.base_change`) if it is isomorphic over `L` to the base change of a variety defined over a proper subfield of `L`.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/FieldOfDefinition.leancomplete
theorem AlgebraicGeometry.Scheme.isBaseChangeFromSubfield_iff.{u} {L : Type u} [Field L] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧L)] [AlgebraicGeometry.Scheme.IsVarietyOver L] : AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield L X ↔ ¬AlgebraicGeometry.Scheme.IsMinimalFieldOfDefinition L X ⊤
theorem AlgebraicGeometry.Scheme.isBaseChangeFromSubfield_iff.{u} {L : Type u} [Field L] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧L)] [AlgebraicGeometry.Scheme.IsVarietyOver L] : AlgebraicGeometry.Scheme.IsBaseChangeFromSubfield L X ↔ ¬AlgebraicGeometry.Scheme.IsMinimalFieldOfDefinition L X ⊤
A variety over `L` is a base change if and only if `L` is not a minimal field of definition of it.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/FieldOfDefinition.leancomplete
def AlgebraicGeometry.Scheme.IsMinimalFieldOfDefinition.{u} (L : Type u) [Field L] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧L)] (k₀ : Subfield L) : Prop
def AlgebraicGeometry.Scheme.IsMinimalFieldOfDefinition.{u} (L : Type u) [Field L] (X : AlgebraicGeometry.Scheme) [X.Over (AlgebraicGeometry.Spec ↧L)] (k₀ : Subfield L) : Prop
A subfield `k₀ ⊆ L` is a **minimal field of definition** (LMFDB `ag.minimal_field`) of a variety `X` over `L` if it is a field of definition of `X` that contains no other field of definition of `X`. A variety may have several minimal fields of definition.
Projective space. (LMFDB)
Projective space \mathbb{P}^n(K) of dimension n over a field K is the set (K^{n+1}\setminus\{0\})/{}\sim{}, where
(x_0,x_1,\dots,x_n) \sim (y_0,y_1,\dots,y_n) \iff x_0=\lambda y_0, \dots, x_n=\lambda y_n\quad\text{for some}\ \lambda\in K^*.
This is also known as the projectivization of the vector space K^{n+1}.
The equivalence class of (x_0,x_1,\dots,x_n) in \mathbb{P}^n(K) is denoted by (x_0:x_1:\dots:x_n), and the x_i are called homogeneous coordinates. Thus
\mathbb{P}^n(K) = \{(x_0:\dots:x_n)\mid x_0,\dots,x_n\in K,\ \text{not all zero}\}.
Tau Ceti Review: Projectivization.
Depends on: Definition 1.1.30
Lean code for Definition1.2.45●1 definition
Associated Lean declarations
-
Projectivization[complete]
-
Projectivization[complete]
-
defdefined in Mathlib/LinearAlgebra/Projectivization/Basic.leancomplete
def Projectivization.{u_1, u_2} (K : Type u_1) (V : Type u_2) [DivisionRing K] [AddCommGroup V] [Module K V] : Type u_2
def Projectivization.{u_1, u_2} (K : Type u_1) (V : Type u_2) [DivisionRing K] [AddCommGroup V] [Module K V] : Type u_2
The projectivization of the `K`-vector space `V`. The notation `ℙ K V` is preferred.
-
AlgebraicGeometry.Scheme.IsQuotientCurve[complete] -
AlgebraicGeometry.Scheme.exists_isQuotientCurve[complete] -
AlgebraicGeometry.Scheme.IsQuotientCurve.surjective_left[complete] -
AlgebraicGeometry.Scheme.IsQuotientCurve.left_apply_eq_iff[complete] -
AlgebraicGeometry.Scheme.StableAffineOpen.TwoChartCover.quotient[complete] -
AlgebraicGeometry.Scheme.exists_isAffineOpen_forall_mem[complete]
Quotient curve. (LMFDB)
Let X be an algebraic curve and let H be a finite subgroup of its automorphism group.
The quotient curve X/H is the algebraic curve obtained by identifying points of X that lie in the same H-orbit (equations defining X/H as an algebraic variety of dimension one can be constructed from the equations defining X and the automorphisms in H).
The natural projection X\to X/H that sends each point on X to its H-orbit is a surjective morphism
Depends on: Definition 1.2.16 Definition 1.2.60 Definition 4.2.5
Lean code for Definition1.2.46●6 declarations
Associated Lean declarations
-
AlgebraicGeometry.Scheme.IsQuotientCurve[complete]
-
AlgebraicGeometry.Scheme.exists_isQuotientCurve[complete]
-
AlgebraicGeometry.Scheme.IsQuotientCurve.surjective_left[complete]
-
AlgebraicGeometry.Scheme.IsQuotientCurve.left_apply_eq_iff[complete]
-
AlgebraicGeometry.Scheme.StableAffineOpen.TwoChartCover.quotient[complete]
-
AlgebraicGeometry.Scheme.exists_isAffineOpen_forall_mem[complete]
-
AlgebraicGeometry.Scheme.IsQuotientCurve[complete] -
AlgebraicGeometry.Scheme.exists_isQuotientCurve[complete] -
AlgebraicGeometry.Scheme.IsQuotientCurve.surjective_left[complete] -
AlgebraicGeometry.Scheme.IsQuotientCurve.left_apply_eq_iff[complete] -
AlgebraicGeometry.Scheme.StableAffineOpen.TwoChartCover.quotient[complete] -
AlgebraicGeometry.Scheme.exists_isAffineOpen_forall_mem[complete]
-
structuredefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/Quotient.leancomplete
structure AlgebraicGeometry.Scheme.IsQuotientCurve.{u} {K : Type u} [Field K] {X Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (H : Subgroup (CategoryTheory.Aut X)) (π : X ⟶ Y) : Prop
structure AlgebraicGeometry.Scheme.IsQuotientCurve.{u} {K : Type u} [Field K] {X Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (H : Subgroup (CategoryTheory.Aut X)) (π : X ⟶ Y) : Prop
A morphism `π : X ⟶ Y` of schemes over `K` exhibits `Y` as the **quotient curve** `X / H` (LMFDB `ag.quotient_curve`) of an algebraic curve `X` over `K` by a finite subgroup `H` of its automorphism group if `Y` is an algebraic curve over `K`, `π` is invariant under `H`, and every morphism over `K` from `X` that is invariant under `H` factors uniquely through `π`.
Fields
isAlgebraicCurveOver_left : AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K
The source `X` is an algebraic curve.
finite : Finite ↥H
The group `H` is finite.
isAlgebraicCurveOver_right : AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K
The quotient is an algebraic curve.
hom_comp : ∀ h ∈ H, CategoryTheory.CategoryStruct.comp h.asIso.hom π = π
The projection is invariant under `H`.
existsUnique_comp_eq : ∀ ⦃Z : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)⦄ (f : X ⟶ Z), (∀ h ∈ H, CategoryTheory.CategoryStruct.comp h.asIso.hom f = f) → ∃! g, CategoryTheory.CategoryStruct.comp π g = f
Every morphism invariant under `H` factors uniquely through the projection.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/QuotientExistence.leancomplete
theorem AlgebraicGeometry.Scheme.exists_isQuotientCurve.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (H : Subgroup (CategoryTheory.Aut X)) [Finite ↥H] [AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K] : ∃ Y π, AlgebraicGeometry.Scheme.IsQuotientCurve H π
theorem AlgebraicGeometry.Scheme.exists_isQuotientCurve.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} (H : Subgroup (CategoryTheory.Aut X)) [Finite ↥H] [AlgebraicGeometry.Scheme.IsAlgebraicCurveOver K] : ∃ Y π, AlgebraicGeometry.Scheme.IsQuotientCurve H π
**Existence of quotient curves** (LMFDB `ag.quotient_curve`): every algebraic curve over `K` has a quotient curve by every finite subgroup of its automorphism group.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/QuotientExistence.leancomplete
theorem AlgebraicGeometry.Scheme.IsQuotientCurve.surjective_left.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {H : Subgroup (CategoryTheory.Aut X)} {Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {π : X ⟶ Y} (hπ : AlgebraicGeometry.Scheme.IsQuotientCurve H π) : AlgebraicGeometry.Surjective (CategoryTheory.Over.Hom.left π)
theorem AlgebraicGeometry.Scheme.IsQuotientCurve.surjective_left.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {H : Subgroup (CategoryTheory.Aut X)} {Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {π : X ⟶ Y} (hπ : AlgebraicGeometry.Scheme.IsQuotientCurve H π) : AlgebraicGeometry.Surjective (CategoryTheory.Over.Hom.left π)
**The projection onto a quotient curve is surjective** (LMFDB `ag.quotient_curve`).
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/QuotientExistence.leancomplete
theorem AlgebraicGeometry.Scheme.IsQuotientCurve.left_apply_eq_iff.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {H : Subgroup (CategoryTheory.Aut X)} {Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {π : X ⟶ Y} (hπ : AlgebraicGeometry.Scheme.IsQuotientCurve H π) {x y : ↥X.left} : (CategoryTheory.Over.Hom.left π) x = (CategoryTheory.Over.Hom.left π) y ↔ ∃ σ ∈ H, (CategoryTheory.Over.Hom.left σ.asIso.hom) x = y
theorem AlgebraicGeometry.Scheme.IsQuotientCurve.left_apply_eq_iff.{u} {K : Type u} [Field K] {X : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {H : Subgroup (CategoryTheory.Aut X)} {Y : CategoryTheory.Over (AlgebraicGeometry.Spec ↧K)} {π : X ⟶ Y} (hπ : AlgebraicGeometry.Scheme.IsQuotientCurve H π) {x y : ↥X.left} : (CategoryTheory.Over.Hom.left π) x = (CategoryTheory.Over.Hom.left π) y ↔ ∃ σ ∈ H, (CategoryTheory.Over.Hom.left σ.asIso.hom) x = y
**The fibres of the projection onto a quotient curve are the orbits** (LMFDB `ag.quotient_curve`): the quotient curve identifies the points of each orbit, and no others.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/TwoChartQuotient.leancomplete
def AlgebraicGeometry.Scheme.StableAffineOpen.TwoChartCover.quotient.{u, v} {X : AlgebraicGeometry.Scheme} {G : Type v} [Group G] {ρ : G →* CategoryTheory.Aut X} (C : AlgebraicGeometry.Scheme.StableAffineOpen.TwoChartCover ρ) [Finite G] : AlgebraicGeometry.Scheme
def AlgebraicGeometry.Scheme.StableAffineOpen.TwoChartCover.quotient.{u, v} {X : AlgebraicGeometry.Scheme} {G : Type v} [Group G] {ρ : G →* CategoryTheory.Aut X} (C : AlgebraicGeometry.Scheme.StableAffineOpen.TwoChartCover ρ) [Finite G] : AlgebraicGeometry.Scheme
The **invariant quotient** of a scheme with a two-chart cover (LMFDB `ag.quotient_curve`): the invariant quotients of the two charts glued along the invariant quotient of their intersection.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Curve/FiniteSetAffineOpen.leancomplete
theorem AlgebraicGeometry.Scheme.exists_isAffineOpen_forall_mem.{u} {X : AlgebraicGeometry.Scheme} [AlgebraicGeometry.IsIntegral X] {S : Set ↥X} (K : Type u) [Field K] [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K)] [CompactSpace ↥X] [AlgebraicGeometry.IsSeparated (X ↘ AlgebraicGeometry.Spec ↧K)] (hX : topologicalKrullDim ↥X = 1) (hS : S.Finite) (hη : genericPoint ↥X ∉ S) : ∃ U, AlgebraicGeometry.IsAffineOpen U ∧ S ⊆ ↑U
theorem AlgebraicGeometry.Scheme.exists_isAffineOpen_forall_mem.{u} {X : AlgebraicGeometry.Scheme} [AlgebraicGeometry.IsIntegral X] {S : Set ↥X} (K : Type u) [Field K] [X.Over (AlgebraicGeometry.Spec ↧K)] [AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K)] [CompactSpace ↥X] [AlgebraicGeometry.IsSeparated (X ↘ AlgebraicGeometry.Spec ↧K)] (hX : topologicalKrullDim ↥X = 1) (hS : S.Finite) (hη : genericPoint ↥X ∉ S) : ∃ U, AlgebraicGeometry.IsAffineOpen U ∧ S ⊆ ↑U
**A finite set of closed points of a curve lies in an affine open subset.** The closed points are the points other than the generic point, and the curve need not be proper or regular.
Real endomorphism algebra. (LMFDB)
The real endomorphism algebra of an abelian variety A is the \R-algebra \textrm{End}(A)\otimes\R, where \textrm{End}(A) is the endomorphism ring of A.
Tau Ceti Review: TauCeti.AlgebraicGeometry.AbelianVariety.End.
Depends on: Definition 1.2.22
Lean code for Definition1.2.47●1 definition
Associated Lean declarations
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
The endomorphism ring of an abelian variety `A`: the endomorphisms of `A`, with addition the pointwise group law of `A` and multiplication composition. Since the pointwise group law on `A ⟶ A` is written multiplicatively (see `AbelianVariety.Hom.instCommGroup`) while a ring is written additively, this is the additive reindexing of the group `A ⟶ A`; use `AbelianVariety.End.toHom` and `AbelianVariety.End.ofHom` to pass between an element of the ring and the endomorphism it denotes.
Real geometric endomorphism algebra. (LMFDB)
The real geometric endomorphism algebra of an abelian variety A over a field F is the \R-algebra \textrm{End}(A_{\overline{F}})\otimes\R, where \textrm{End}(A_{\overline{F}}) is the geometric endomorphism ring of A.
Tau Ceti Review: TauCeti.AlgebraicGeometry.AbelianVariety.End, TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.
Depends on: Definition 1.2.26
Lean code for Definition1.2.48●2 definitions
Associated Lean declarations
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/End/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
def TauCeti.AlgebraicGeometry.AbelianVariety.End.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
The endomorphism ring of an abelian variety `A`: the endomorphisms of `A`, with addition the pointwise group law of `A` and multiplication composition. Since the pointwise group law on `A ⟶ A` is written multiplicatively (see `AbelianVariety.Hom.instCommGroup`) while a ring is written additively, this is the additive reindexing of the group `A ⟶ A`; use `AbelianVariety.End.toHom` and `AbelianVariety.End.ofHom` to pass between an element of the ring and the endomorphism it denotes.
-
defdefined in TauCeti/AlgebraicGeometry/AbelianVariety/Basic.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : TauCeti.AlgebraicGeometry.AbelianVariety L
def TauCeti.AlgebraicGeometry.AbelianVariety.baseChange.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) (L : Type u) [Field L] [Algebra K L] : TauCeti.AlgebraicGeometry.AbelianVariety L
The base change of an abelian variety along a field extension `K → L`, obtained by pulling back the group scheme along `Spec L → Spec K`. Properness and geometric integrality are stable under base change, and the monoidal pullback functor carries the group-object structure (`Functor.grpObjObj`), so the result is again an abelian variety. This realizes the roadmap's base-change compatibility of the Jacobian at the level of abelian varieties.
Real multiplication. (LMFDB)
An abelian variety is said to have real multiplication (RM) if its endomorphism algebra is a totally real (number) field. (In most situations, we exclude the trivial case of RM by \Q.)
Depends on: Definition 1.2.2 Definition 1.2.21
Lean code for Definition1.2.49●4 declarations
Associated Lean declarations
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/AbelianVariety/RealMultiplication.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.HasRealMultiplication.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Prop
def TauCeti.AlgebraicGeometry.AbelianVariety.HasRealMultiplication.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Prop
An abelian variety `A` has **real multiplication** (LMFDB `ag.real_multiplication`), or RM, if its endomorphism algebra `End(A) ⊗ ℚ` is a totally real number field: it is isomorphic as a `ℚ`-algebra to a totally real number field `F`. This includes the trivial case `F = ℚ`, which the LMFDB usually excludes; see `HasNontrivialRealMultiplication`.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/AbelianVariety/RealMultiplication.leancomplete
def TauCeti.AlgebraicGeometry.AbelianVariety.HasNontrivialRealMultiplication.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Prop
def TauCeti.AlgebraicGeometry.AbelianVariety.HasNontrivialRealMultiplication.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Prop
An abelian variety `A` has **real multiplication** (LMFDB `ag.real_multiplication`) in the LMFDB's usual sense, excluding the trivial case of RM by `ℚ`: its endomorphism algebra `End(A) ⊗ ℚ` is isomorphic as a `ℚ`-algebra to a totally real number field `F` with `[F : ℚ] > 1`.
-
theoremdefined in LeanBridge/ForMathlib/AlgebraicGeometry/AbelianVariety/RealMultiplication.leancomplete
theorem TauCeti.AlgebraicGeometry.AbelianVariety.hasRealMultiplication_congr.{u} {K : Type u} [Field K] {A B : TauCeti.AlgebraicGeometry.AbelianVariety K} (e : A ≅ B) : A.HasRealMultiplication ↔ B.HasRealMultiplication
theorem TauCeti.AlgebraicGeometry.AbelianVariety.hasRealMultiplication_congr.{u} {K : Type u} [Field K] {A B : TauCeti.AlgebraicGeometry.AbelianVariety K} (e : A ≅ B) : A.HasRealMultiplication ↔ B.HasRealMultiplication
**Having real multiplication only depends on the isomorphism class of the abelian variety.**
-
abbrevdefined in LeanBridge/ForMathlib/AlgebraicGeometry/AbelianVariety/ComplexMultiplication.leancomplete
abbrev TauCeti.AlgebraicGeometry.AbelianVariety.EndAlgebra.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
abbrev TauCeti.AlgebraicGeometry.AbelianVariety.EndAlgebra.{u} {K : Type u} [Field K] (A : TauCeti.AlgebraicGeometry.AbelianVariety K) : Type u
The **endomorphism algebra** `End(A) ⊗ ℚ` of an abelian variety `A`, a `ℚ`-algebra. It is written `ℚ ⊗[ℤ] End A`, with the rational numbers on the left, so that it is a `ℚ`-algebra through `Algebra.TensorProduct.leftAlgebra`.
Regulator of an abelian variety. (LMFDB)
The regulator of an abelian variety A defined over a number field K, denoted \operatorname{Reg}(A/K), is the volume of A(K)/A(K)_{tor} with respect to the height pairing \langle -,-\rangle associated to the canonical height \hat{h}, i.e. \langle P,Q\rangle = \frac{1}{2}(\hat{h}(P+Q)-\hat{h}(P)-\hat{h}(Q)).
If the Mordell-Weil group A(K) has rank r and P_1, \ldots, P_r \in E(K) generate A(K)/A(K)_{\text{tors}}, then
\operatorname{Reg}(A/K) = \left|\det (\langle P_i, P_j \rangle )_{1\leq i,j \leq r}\right|,
which is independent of the choice of generators.
If A(K) has rank 0, then \operatorname{Reg}(A/K)=1.
If A(K) has rank 1, then \operatorname{Reg}(A/K) equals the canonical height \hat{h}(P) of a point P generating A(K)/A(K)_{\text{tors}}.
This is a generalisation of the regulator of an elliptic curve.
Depends on: Definition 1.2.2 Definition 1.2.10 Definition 1.2.41 Definition 4.1.108 Definition 5.1.1
Riemann surface. (LMFDB)
A Riemann surface is a connected complex manifold of dimension one. Compact Riemann surfaces can be identified with smooth projective curves over \C.
- No associated Lean code or declarations.
Sato-Tate group (of a motive). (LMFDB)
The Sato-Tate group of a motive over a number field is a compact (but often disconnected) Lie group which conjecturally governs the variation of Euler factors of the L-function associated to this motive. For example, for (the 1-motive of) a generic abelian variety of dimension g, this group is \mathrm{USp}(2g).
For an elliptic curve E over a number field K, the Sato-Tate group equals \mathrm{SU}(2) if E does not have complex multiplication. Otherwise, one gets \mathrm{SO}(2) if E has CM defined over K, and the normalizer of \mathrm{SO}(2) in \mathrm{SU}(2) if E has CM not defined over K.
For an abelian surface A over a number field K, there are 52 possible Sato-Tate groups as classified by Fité-Kedlaya-Rotger-Sutherland ; of these, 34 can occur for K = \mathbb{Q}. The typical case \mathrm{USp}(4) occurs when \mathrm{End}(A_{\overline{K}}) = \mathbb{Z}.
Selmer group of an abelian variety. (LMFDB)
Let A be an abelian variety over a number field K.
Let n \ge 1.
Let G_K be the absolute Galois group of K.
There is a connecting homomorphism A(K)/nA(K) \to H^1(G_K,A[n]), and likewise a homomorphism A(K_v)/nA(K_v) \to H^1(G_{K_v},A[n]) for each place v of K.
The n-Selmer group \operatorname{Sel}_n A is the set of classes in H^1(G_K, A[n]) whose image in H^1(G_{K_v},A[n]) lies in the image of A(K_v)/nA(K_v) \to H^1(G_{K_v},A[n]) for every place v, including the archimedean places.
One may also define the Selmer group for any isogeny from A to another abelian variety over a global field.
Any Selmer group is finite and effectively computable. In fact, all known techniques for computing the Mordell-Weil group of A involve computing a Selmer group.
Depends on: Definition 1.2.2 Definition 1.2.41 Definition 4.9.11 Definition 8.3.56 Definition 5.1.1 Definition 5.1.4 Definition 5.1.61
Shimura variety. (LMFDB)
There are a number of different ways to define a Shimura variety.
One definition starts with connected complex manifolds such that for every point on the manifold there is an involution fixing only that point. If this manifold is isomorphic to a bounded open subset of \C^n for some n, it is called a Hermitian symmetric domain (or space).
Then, (connected) Shimura varieties are quotients of Hermitian symmetric domains by torsion-free subgroups of the group of automorphisms of the domain.
Simple. (LMFDB)
An abelian variety is simple if it is nonzero and not isogenous to a product of abelian varieties of lower dimension.
Depends on: Definition 1.2.2
Non-singular point (definition). (LMFDB)
Let V be a variety over a perfect field F. A point P of V is non-singular if the module of differentials of V is locally free at P. According to the Jacobian criterion, if V is defined in a neighborhood of P by affine polynomial equations f_1(X_1, \ldots, X_n) = \ldots =f_r(X_1, \ldots, X_n)=0, then V is non-singular at P if the Jacobian matrix \left( \frac{\partial f_i}{\partial X_j} \right)_{ij} has the same rank as the codimension of V in \mathbb{A}^n.
-
TauCeti.torusSplittingField[complete] -
TauCeti.IsTorusSplittingField[complete] -
TauCeti.IsTorusSplitOver[complete] -
TauCeti.torusCommHopfAlgProperty[complete] -
TauCeti.isTorusSplittingField_torusSplittingField[complete] -
TauCeti.torusSplittingField_eq_normalClosure[complete]
Splitting field. (LMFDB)
The splitting field of an algebraic torus T is the minimal Galois extension of its base field over which T becomes isomorphic to a power of the multiplicative group \mathbb{G}_m.
Tau Ceti Review: TauCeti.torusCommHopfAlgProperty.
Depends on: Definition 1.2.8 Definition 5.1.44
Lean code for Definition1.2.57●6 declarations
Associated Lean declarations
-
TauCeti.torusSplittingField[complete]
-
TauCeti.IsTorusSplittingField[complete]
-
TauCeti.IsTorusSplitOver[complete]
-
TauCeti.torusCommHopfAlgProperty[complete]
-
TauCeti.isTorusSplittingField_torusSplittingField[complete]
-
TauCeti.torusSplittingField_eq_normalClosure[complete]
-
TauCeti.torusSplittingField[complete] -
TauCeti.IsTorusSplittingField[complete] -
TauCeti.IsTorusSplitOver[complete] -
TauCeti.torusCommHopfAlgProperty[complete] -
TauCeti.isTorusSplittingField_torusSplittingField[complete] -
TauCeti.torusSplittingField_eq_normalClosure[complete]
-
defdefined in LeanBridge/ForMathlib/Algebra/AlgebraicGroup/TorusSplittingField.leancomplete
def TauCeti.torusSplittingField.{u} {k : Type u} [Field k] (H : TauCeti.FiniteTypeCommHopfAlgCat k) : IntermediateField k (AlgebraicClosure k)
def TauCeti.torusSplittingField.{u} {k : Type u} [Field k] (H : TauCeti.FiniteTypeCommHopfAlgCat k) : IntermediateField k (AlgebraicClosure k)
The **splitting field** (LMFDB `ag.splitting_field`) of a torus `T` over `k`, with coordinate Hopf algebra `H`: the minimal Galois extension of `k` inside the algebraic closure `k̄` over which `T` becomes isomorphic to a power of `𝔾ₘ`, defined as the infimum of all such extensions. For a torus, these extensions are exactly the Galois extensions containing the field of definition of the characters of `T`, and the infimum is its normal closure, a finite Galois extension of `k` that splits `T` (`TauCeti.torusSplittingField_eq_normalClosure`, `TauCeti.isTorusSplittingField_torusSplittingField`). When `H` is not the coordinate ring of a torus, nothing splits it and the value is the junk value `k̄`.
-
defdefined in LeanBridge/ForMathlib/Algebra/AlgebraicGroup/TorusSplittingField.leancomplete
def TauCeti.IsTorusSplittingField.{u} {k : Type u} [Field k] (H : TauCeti.FiniteTypeCommHopfAlgCat k) (E : IntermediateField k (AlgebraicClosure k)) : Prop
def TauCeti.IsTorusSplittingField.{u} {k : Type u} [Field k] (H : TauCeti.FiniteTypeCommHopfAlgCat k) (E : IntermediateField k (AlgebraicClosure k)) : Prop
An intermediate field `E` of `k̄ / k` is the **splitting field** (LMFDB `ag.splitting_field`) of a torus `T` over `k`, with coordinate Hopf algebra `H`, if it is the least Galois extension of `k` inside `k̄` over which `T` becomes isomorphic to a power of `𝔾ₘ`.
-
defdefined in LeanBridge/ForMathlib/Algebra/AlgebraicGroup/TorusSplittingField.leancomplete
def TauCeti.IsTorusSplitOver.{u} {k : Type u} [Field k] (H : TauCeti.FiniteTypeCommHopfAlgCat k) (E : IntermediateField k (AlgebraicClosure k)) : Prop
def TauCeti.IsTorusSplitOver.{u} {k : Type u} [Field k] (H : TauCeti.FiniteTypeCommHopfAlgCat k) (E : IntermediateField k (AlgebraicClosure k)) : Prop
A torus over `k`, with coordinate Hopf algebra `H`, **splits** over an intermediate field `E` of `k̄ / k` if it becomes a split torus `𝔾ₘⁿ` over `E`: the base change `E ⊗[k] H` is the coordinate ring of a split torus of finite rank.
-
defdefined in TauCeti/Algebra/AlgebraicGroup/Torus/Basic.leancomplete
def TauCeti.torusCommHopfAlgProperty.{u} (k : Type u) [Field k] : CategoryTheory.ObjectProperty (TauCeti.FiniteTypeCommHopfAlgCat k)
def TauCeti.torusCommHopfAlgProperty.{u} (k : Type u) [Field k] : CategoryTheory.ObjectProperty (TauCeti.FiniteTypeCommHopfAlgCat k)
The object property selecting finite-type commutative Hopf algebras that become coordinate rings of split tori of finite rank after base change to an algebraic closure. This is the coordinate-Hopf-algebra definition of a not-necessarily-split torus over `k`.
-
theoremdefined in LeanBridge/ForMathlib/Algebra/AlgebraicGroup/TorusSplittingFieldExistence.leancomplete
theorem TauCeti.isTorusSplittingField_torusSplittingField.{u} {k : Type u} [Field k] {H : TauCeti.FiniteTypeCommHopfAlgCat k} (hH : TauCeti.torusCommHopfAlgProperty k H) : TauCeti.IsTorusSplittingField H (TauCeti.torusSplittingField H)
theorem TauCeti.isTorusSplittingField_torusSplittingField.{u} {k : Type u} [Field k] {H : TauCeti.FiniteTypeCommHopfAlgCat k} (hH : TauCeti.torusCommHopfAlgProperty k H) : TauCeti.IsTorusSplittingField H (TauCeti.torusSplittingField H)
**The splitting field of a torus exists** (LMFDB `ag.splitting_field`): for a torus `T` over a field `k`, perfect or not, `TauCeti.torusSplittingField` is a Galois extension of `k` inside `k̄` over which `T` becomes isomorphic to a power of `𝔾ₘ`, contained in every other such extension.
-
theoremdefined in LeanBridge/ForMathlib/Algebra/AlgebraicGroup/TorusSplittingFieldExistence.leancomplete
theorem TauCeti.torusSplittingField_eq_normalClosure.{u} {k : Type u} [Field k] {H : TauCeti.FiniteTypeCommHopfAlgCat k} (hH : TauCeti.torusCommHopfAlgProperty k H) : TauCeti.torusSplittingField H = IntermediateField.normalClosure k (↥(TauCeti.torusCharacterField H)) (AlgebraicClosure k)
theorem TauCeti.torusSplittingField_eq_normalClosure.{u} {k : Type u} [Field k] {H : TauCeti.FiniteTypeCommHopfAlgCat k} (hH : TauCeti.torusCommHopfAlgProperty k H) : TauCeti.torusSplittingField H = IntermediateField.normalClosure k (↥(TauCeti.torusCharacterField H)) (AlgebraicClosure k)
**The splitting field of a torus is the normal closure of the field of definition of its characters.**
Tate-Shafarevich group. (LMFDB)
The Tate-Shafarevich group of an abelian variety A over a number field K is
\Sha(A) = \ker\Bigl(H^1(G_K,A) \to \prod_v H^1(G_{K_v},A_{K_v})\Bigr),
where G_K is the absolute Galois group of K,
and v ranges over all places of K, including the archimedean places.
It classifies locally solvable principal homogeneous spaces of A.
It is a torsion abelian group that is conjectured to be finite.
Depends on: Definition 1.2.2 Definition 1.2.59 Definition 4.2.40 Definition 8.3.56 Definition 8.3.178 Definition 5.1.1 Definition 5.1.4 Definition 5.1.61
Principal homogeneous space. (LMFDB)
A principal homogeneous space (or torsor) of an abelian variety A over a field k is a variety X equipped with an A-action such that (X_{\overline{k}} with the induced A_{\overline{k}}-action) is isomorphic to (A_{\overline{k}} with A_{\overline{k}}-action given by translation).
The set of isomorphism classes of principal homogeneous spaces of A is in bijection with the Galois cohomology group H^1(k,A) = H^1(G_k,A(\overline{k})), where \overline{k} is a separable closure of k, and G_k is the absolute Galois group \Gal(\overline{k}/k), so it has the structure of an abelian group.
For a principal homogeneous space X, the following are equivalent:
-
Xhas a rational point; -
there is an
A-equivariant isomorphismX \to A; -
the class of
XinH^1(k,A)is0.
Depends on: Definition 1.2.2 Definition 1.2.60 Definition 8.3.56
-
MvPolynomial.IsAffineAlgebraicSet[complete] -
MvPolynomial.IsAffineVarietyOver[complete] -
MvPolynomial.IsProjectiveAlgebraicSet[complete] -
MvPolynomial.IsProjectiveVarietyOver[complete] -
AlgebraicGeometry.Scheme.IsVarietyOver[complete]
Algebraic variety. (LMFDB)
There are two main kinds of algebraic varieties, *affine varieties* and *projective varieties*. Both are defined as the set of common zeros of a collection of polynomials.
Let K be a field with algebraic closure \overline{K}.
An affine algebraic set is a subset of affine space \mathbb{A}^n(\overline{K}) of the form
V(I) = \{P \in \mathbb{A}^n(\overline{K}) : f(P) = 0\text{ for all }f \in I\}
where I \subseteq \overline{K}[x_1,\dots,x_n] is an ideal. Given an affine algebraic set V, its defining ideal is
I(V) = \{ f \in \overline{K}[x_1,\dots,x_n] : f(P)=0\text{ for all }P \in V\}.
An affine variety over \overline{K} is an affine algebraic set whose defining ideal I \subseteq \overline{K}[x_1,\dots,x_n] is a prime ideal. An affine variety over K is an affine variety over \overline{K} whose defining ideal can be generated by polynomials in K[x_1,\dots,x_n].
We define projective notions similarly. A projective algebraic set is a subset of projective space \mathbb{P}^n(\overline{K}) defined by a *homogeneous* ideal I \subseteq \overline{K}[x_1,\dots,x_n]. A projective variety over \overline{K} is a projective algebraic set whose defining ideal is a homogeneous prime ideal. A projective variety over K is a projective variety over \overline{K} whose defining ideal can be generated by homogeneous polynomials in K[x_1,\dots,x_n].
Depends on: Definition 1.2.3 Definition 1.2.45 Definition 1.1.30 Definition 1.1.41
Lean code for Definition1.2.60●5 definitions
Associated Lean declarations
-
MvPolynomial.IsAffineAlgebraicSet[complete]
-
MvPolynomial.IsAffineVarietyOver[complete]
-
MvPolynomial.IsProjectiveAlgebraicSet[complete]
-
MvPolynomial.IsProjectiveVarietyOver[complete]
-
AlgebraicGeometry.Scheme.IsVarietyOver[complete]
-
MvPolynomial.IsAffineAlgebraicSet[complete] -
MvPolynomial.IsAffineVarietyOver[complete] -
MvPolynomial.IsProjectiveAlgebraicSet[complete] -
MvPolynomial.IsProjectiveVarietyOver[complete] -
AlgebraicGeometry.Scheme.IsVarietyOver[complete]
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Affine.leancomplete
def MvPolynomial.IsAffineAlgebraicSet.{u_1, u_3} {σ : Type u_1} {L : Type u_3} [Field L] (V : Set (σ → L)) : Prop
def MvPolynomial.IsAffineAlgebraicSet.{u_1, u_3} {σ : Type u_1} {L : Type u_3} [Field L] (V : Set (σ → L)) : Prop
An **affine algebraic set** (LMFDB `ag.variety`): a subset `V` of affine space `σ → L` of the form `V(I) = {P | f(P) = 0 for all f ∈ I}` for an ideal `I` of `L[xᵢ | i ∈ σ]`. -
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Affine.leancomplete
def MvPolynomial.IsAffineVarietyOver.{u_1, u_2, u_3} {σ : Type u_1} (K : Type u_2) {L : Type u_3} [Field K] [Field L] [Algebra K L] (V : Set (σ → L)) : Prop
def MvPolynomial.IsAffineVarietyOver.{u_1, u_2, u_3} {σ : Type u_1} (K : Type u_2) {L : Type u_3} [Field K] [Field L] [Algebra K L] (V : Set (σ → L)) : Prop
An **affine variety over `K`** (LMFDB `ag.variety`): an affine variety `V` over `L = K̄` whose defining ideal can be generated by polynomials with coefficients in `K`.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Projective.leancomplete
def MvPolynomial.IsProjectiveAlgebraicSet.{u_1, u_3} {σ : Type u_1} {L : Type u_3} [Field L] (V : Set (Projectivization L (σ → L))) : Prop
def MvPolynomial.IsProjectiveAlgebraicSet.{u_1, u_3} {σ : Type u_1} {L : Type u_3} [Field L] (V : Set (Projectivization L (σ → L))) : Prop
A **projective algebraic set** (LMFDB `ag.variety`): a subset `V` of projective space `ℙ(L^σ)` which is the zero locus of a homogeneous ideal `I` of `L[xᵢ | i ∈ σ]`.
-
defdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Projective.leancomplete
def MvPolynomial.IsProjectiveVarietyOver.{u_1, u_2, u_3} {σ : Type u_1} (K : Type u_2) {L : Type u_3} [Field K] [Field L] [Algebra K L] (V : Set (Projectivization L (σ → L))) : Prop
def MvPolynomial.IsProjectiveVarietyOver.{u_1, u_2, u_3} {σ : Type u_1} (K : Type u_2) {L : Type u_3} [Field K] [Field L] [Algebra K L] (V : Set (Projectivization L (σ → L))) : Prop
A **projective variety over `K`** (LMFDB `ag.variety`): a projective variety `V` over `L = K̄` whose defining ideal can be generated by homogeneous polynomials with coefficients in `K`.
-
classdefined in LeanBridge/ForMathlib/AlgebraicGeometry/Variety/Basic.leancomplete
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
class AlgebraicGeometry.Scheme.IsVarietyOver.{u} (K : Type u) [Field K] {X : AlgebraicGeometry.Scheme} [X.Over (AlgebraicGeometry.Spec ↧K)] : Prop
An **algebraic variety** over a field `K` (LMFDB `ag.variety`), as a scheme: a scheme over `K` that is geometrically integral, separated and of finite type (quasi-compact and locally of finite type) over `K`.
Extends
-
AlgebraicGeometry.GeometricallyIntegral (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.IsSeparated (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.LocallyOfFiniteType (X ↘ AlgebraicGeometry.Spec ↧K) -
AlgebraicGeometry.QuasiCompact (X ↘ AlgebraicGeometry.Spec ↧K)
Methods
geometrically_isIntegral : AlgebraicGeometry.geometrically AlgebraicGeometry.IsIntegral (X ↘ AlgebraicGeometry.Spec ↧K)
Inherited from-
AlgebraicGeometry.GeometricallyIntegral
isClosedImmersion_diagonal : AlgebraicGeometry.IsClosedImmersion (CategoryTheory.Limits.pullback.diagonal (X ↘ AlgebraicGeometry.Spec ↧K))
Inherited from-
AlgebraicGeometry.IsSeparated
finiteType_appLE : ∀ {U : (AlgebraicGeometry.Spec ↧K).Opens}, AlgebraicGeometry.IsAffineOpen U → ∀ {V : X.Opens}, AlgebraicGeometry.IsAffineOpen V → ∀ (e : V ≤ (TopologicalSpace.Opens.map (X ↘ AlgebraicGeometry.Spec ↧K).base).obj U), (CommRingCat.Hom.hom (AlgebraicGeometry.Scheme.Hom.appLE (X ↘ AlgebraicGeometry.Spec ↧K) U V e)).FiniteType
Inherited from-
AlgebraicGeometry.LocallyOfFiniteType
isCompact_preimage : ∀ (U : Set ↥(AlgebraicGeometry.Spec ↧K)), IsOpen U → IsCompact U → IsCompact (⇑(X ↘ AlgebraicGeometry.Spec ↧K) ⁻¹' U)
Inherited from-
AlgebraicGeometry.QuasiCompact
-